thinking topfuel machining on 226

lets see your engine build records or pulling record .  machine shops there anyone who seen the build pictures posted and know what machines would look like to qualify a machine shop can see its there.

Edited by mlpankey - 11 Jan 2013 at 9:01am

Unstylish,

unstylish_ wrote: I think I still have all my build pics on my old digital camera. I'll have to post them to give you some fresh ideas. If you talk anything like you write, i bet u sound like the excited southerner off that old Adam Sandler cd. The second half of ur msg made no sense

Andy you know how i talk you have called me several times .  So is Marty building your engines now or are you still hanging out at Garry Bakers shop.

Edited by mlpankey - 11 Jan 2013 at 9:34am

Yeah, in 08 or 09 I think I talked to you two or three times. You were a ok guy on the phone, but then there was a topic on YT about a guy running roller lifters and some other stuff, and you told the guy he was full of it, JUST like you did to Marty, without even giving him a chance to explain himself.   Im assuming it was because it was something that was either over your head, or you never thought of..either way, I thought what he was referring to sounded pretty interesting. You lost it right there with me...
 
So I decided that you would do your thing and I would do mine.

Then I met Marty. He called me on some MW pistons I had for sale.Got to tossing around ideas,  saw first hand some of the work he did, saw his tractor run, and seen his machine work. Then I watched you constantly disagree with stuff that he already did YEARS BEFORE! Reminded me of the guy on YT.....


Yes, I build my own motors. Marty did the head, and walked me through the manifold.  Not to sound conceded, but its about the strongest running WC per cubic inch Ive ever been around. He has taught me a TON about airflow that has helped me tweak an AC or two and quite a few MMs up here, including my latest project, a 6" stroke MM Z sidevalve.

As far as Baker goes, his shop is 145 miles away. He is a great guy who has ALWAYS taken time out for me to lend a helping hand, even though he does not think much of the orange ones. However, I learn something new every time Im there, because Im willing to compromise my pride over the advice of a true professional .  

I will dig deep this weekend and find build pics of this motor Im running now. If its not on my digital cam, its on my old phone, and Im not sure where that is. But Ill look for it. Its a long winter, and I figure you could use a little porn..

Are you retarded in real life also? They are different lifters and Marty made a set. Don't you rember seing the details and crying about it cause you didn't think of it and couldn't do it.

Fitting, a link that doesn't work about a shop that doesn't exist. Let us know when you get your econo-mod goobered togather.

Edited by Rod B - 13 Jan 2013 at 7:37pm

You must have missed the part about wi haveing a set in the wc. You should try building an engine on your own pank. Buying them doesn't give much for bragging rights. I rember Hudsonator telling you to use different rods or your engine would blow. Guess he was right and you were wrong. Take some advice from guys like Dr, Hudsonator and Wi. You heard about what Wi helped pull off in Gordyville. You should see the other 5 star clean house in NATPA. All good parts and ideas from T.I.T.S.

Since unstylish brought the lifters up! Why is there the same picture under two different login names and addresses

I bet my old roller lifter setup and roller rockers in the WC is so old one would have to carbon date it in order to find out.  I bet it's from the pre-panknochio era, built when he was crawling and not yet a knuckle dragger.

Edited by wi50 - 14 Jan 2013 at 4:30pm

Union not keeping up with cost of liveing? Hard to imagine anyone keeping underware for any other reason.

D-17_Dave wrote: Panky's problem with his underwear is he wears it on his head. Funny thing is it still has the brown spot show up in the same place.

mlpankey wrote: mlpankey wrote: Since unstylish brought the lifters up! Why is there the same picture under two different login names and addresses again i ask

You don't know. That's why you ask. You already covered this but forgot.

Perhaps if we reduce pank to his constitute elements we'd have nothing but jizz'n glitter.

Typical attempt to get off subject by pank

Wow! This is SERIOUS!

Ive learned so much. 

Cut him a break Rod, he never built anything on his own. The only time the oil pans came off his motors were after he broke them.