Gleaner R62 Rotor Gearbox Oil Capacity

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I’m fairly new to Gleaner rotary combines, as we’ve run L2s for the last 30 years. We recently picked up an early R62 and I’m going through it and getting it ready to use. I figured it would be a good idea to change oil in the rotor gearbox. I only put around 1.5 quarts in before it started coming out of the street elbow on the side. Is that all it takes? My manual says it should take about 2.5 quarts, but I’m wondering if the manual is not correct. 
Thanks

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Brendan (AB) Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 19 Sep 2013 Location: Alberta Points: 44	Post Options Post Reply Quote Brendan (AB) Report Post Thanks(0) Quote Reply Topic: Gleaner R62 Rotor Gearbox Oil Capacity Posted: 23 Sep 2023 at 1:43pm
	I’m fairly new to Gleaner rotary combines, as we’ve run L2s for the last 30 years. We recently picked up an early R62 and I’m going through it and getting it ready to use. I figured it would be a good idea to change oil in the rotor gearbox. I only put around 1.5 quarts in before it started coming out of the street elbow on the side. Is that all it takes? My manual says it should take about 2.5 quarts, but I’m wondering if the manual is not correct. Thanks

Sponsored Links

tbran Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 14 Sep 2009 Location: Paris Tn Points: 3291	Post Options Post Reply Quote tbran Report Post Thanks(0) Quote Reply Posted: 24 Sep 2023 at 1:48pm
	No, it takes just over a qt. Maybe qt and a half. We use the 80-90 SYNTHETIC in the squeeze tube like package - makes it ez w/o funnel. ALSO. On one of our units we tapped - tee'd' -into the auger swing cylinder return hose with a .003 approx orifice - ran a tube to the gearbox drain and then with a one way check valve ran a hose back and tee'd into the reservoir return - now it changes oil about every day and the tad of oil that goes in every dump cools the gearbox as well as the oil has sat in the hose for several minutes. Edited by tbran - 24 Sep 2023 at 1:49pm
	When told "it's not the money,it's the principle", remember, it's always the money..

Brendan (AB) Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 19 Sep 2013 Location: Alberta Points: 44	Post Options Post Reply Quote Brendan (AB) Report Post Thanks(0) Quote Reply Posted: 24 Sep 2023 at 3:02pm
	Thanks for confirming that. I put 75W-90 synthetic oil in, hopefully that will be fine. Your automatic oil change idea sounds interesting, thanks for sharing.