| Author |
 Topic Search  Topic Options
|
DarrylinWA 
Orange Level
Joined: 12 Sep 2009
Location: Amarillo Texas
Points: 1900
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Hundred series front weight question
Posted: 17 Nov 2010 at 7:25pm |
I was at my friend Bobs today and ran across some more of his front weights. I was wondering the following.
Are the starter weights all the same for the 190, 210 and 220 ?
The bolt holes are 16 inches apart that tap into the casting. (3/4 BOLTS).
The other holes are 10 7/8 centers for either the big slab weights 12.5 inches x 24.5 wide or the double stack ones right on top of each other (Top and Bottom).
The cast numbers on the big ones are AC-40. Does that sound right ?
I dont have the suitcase weights for the 210, but would the above all fit ? It looks like it should all bolt up. He has enough to put a stack of 3 on each tractor.
Just looking for some feedback from the AC police if this is right or what you folks think good or bad.
Thanks in advanced, Darryl
|
|
B 10 Custom. Serial # 1001 D21, First D21 built 69 #4498 and Last D 21 Built #4609. 1946 MM UTU. And 2000, 2005 Pete's. AC custom Hauling.
|
 |
|
Sponsored Links
|
|
|
BurtIA
Silver Level
Joined: 27 Nov 2009
Location: Amana, IA
Points: 121
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Nov 2010 at 7:57pm |
They will fit, have them on my 190XT, 210 and 220. Are they correct? Don't know but I like the looks of them.
Take care, Burt
Edited by BurtIA - 17 Nov 2010 at 7:58pm
|
|
Oldoug
Orange Level Access
Joined: 12 Sep 2009
Points: 1150
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2010 at 7:39am |
|
Starter weights should be all the same. AC-40 is not the correct casting number for the orignial Allis weight should be a AM-number. The only your looking at could be a aftermarket version of the weight.
|
|
Matt Folkers
FOLKERS RESTORATION
Restoring vintage things to last so the future can enjoy our past.
|
|
Butch(OH)
Orange Level
Joined: 11 Sep 2009
Location: Lucerne Ohio
Points: 3842
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2010 at 10:42am |
Darryl as far as I know the starter weight is the same across the 100 line. A person does see more 210s w/suitcase brackets than 220s for some reason. I think they both look a little nekid with no weights of some kind hanging out front. Personaly I like the looks of the slabs, just cant decide how many? maybe two more?? As for the correction police,,, I wont go there.
About ready for some fresh orange
|
|
Jordan(OH)
Orange Level
Joined: 11 Sep 2009
Location: Celina, OH
Points: 1573
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2010 at 11:32am |
|
Looken good Butch, where did you find the stack? I'm guessing its a 4in. with a reducer to 3?
|
|
Brian F(IL)
Orange Level Access
Joined: 14 Sep 2009
Location: Paxton, IL
Points: 2724
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2010 at 3:35pm |
I'm with Butch on this issue. I don't remember any Two-Twenty's coming out of Dad's dealership with suitcase weights; only the starter weight and then the slabs (Butch, about 4 more would look great!). I also don't remember any Two-Ten's that did have the starter weight and slabs; only suitcase weights. But, they may very well work/fit just fine.
Check out Brian Ahart's webpage for the "correct" One Hundred series suitcase weights (I've got a few of them but they're not for sale)
Brian F(IL)
|
|
Butch(OH)
Orange Level
Joined: 11 Sep 2009
Location: Lucerne Ohio
Points: 3842
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2010 at 4:35pm |
 Jordan(OH) wrote:
Looken good Butch, where did you find the stack? I'm guessing its a 4in. with a reducer to 3? |
Thank you, Think its the contrast with the olive drab engine? LOL Stack came from Truck Pro 48" x 4" with swaged end, about $75. Reducer from NAPA. They have about 20 4-3 reducers with all combos of inside and outside bla bla bla. Make sure they get the right one, took my NAPA three tries.
Edited by Butch(OH) - 18 Nov 2010 at 4:37pm
|
|
Lonn
Orange Level
Joined: 16 Sep 2009
Location: Назарово,Russia
Points: 29819
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2010 at 5:12pm |
|
OK guys, when did Allis first offer suitcase on a 190?
|
|
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot
|
|
Brian F(IL)
Orange Level Access
Joined: 14 Sep 2009
Location: Paxton, IL
Points: 2724
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Nov 2010 at 8:13am |
Lonn, I don't think AC ever did offer suitcase weights for a One-Ninety from the factory. I think it was the 200 and then the Two-Ten where suitcase weights started (other than the smaller tractors). At least that's what my feeble memory can recall.
Brian F(IL)
|
|
Lester
Orange Level
Joined: 08 Jan 2010
Location: Indiana
Points: 526
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Nov 2010 at 8:53am |
|
The 170 starter weight is a little narrower.
|
|
Chad (MN)
Orange Level
Joined: 29 Oct 2009
Location: sc minnesota
Points: 288
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Nov 2010 at 9:53pm |
I thought I would try suitcase weights on my 220.
Chad (MN)
|
|
220 3-190XT 2-D19d D19g 5-D17 UC 3-WC 2-WD 3-WD45 CA C H3 7-AllCrops 14-plows 3-Gleaners Lawnmowers SC-equipment
|
|
Claus
Orange Level
Joined: 09 Dec 2009
Location: Hebron In
Points: 1166
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Nov 2010 at 10:06pm |
I like the way the Hundred Series tractors look with black suitcase weights. 
Edited by Claus - 21 Nov 2010 at 10:08pm
|
|
