| Author |
 Topic Search  Topic Options
|
Glockhead SWMI 
Orange Level
Joined: 12 Sep 2009
Location: South West Mich
Points: 2657
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: fixing up my wd disc
Posted: 06 Mar 2012 at 2:16pm |
Lifted my disc up to start repairs. Has a few broken blades and spacers. One gang down, one to go. I need to find the tees that go on the lift chains still and tighten up the Frame. This is a big step up from the old light weight farmall disc I had before. 
|
 |
|
Sponsored Links
|
|
|
Brian F(IL)
Orange Level Access
Joined: 14 Sep 2009
Location: Paxton, IL
Points: 2717
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Mar 2012 at 3:20pm |
Is that a CA 20 disc? With the small threaded rod up front in the middle to adjust the fore/aft pitch?
If so, it will be good for spring work but may be too light for fall tillage in cornstalks (bean stubble might be OK).
HTH
|
|
Glockhead SWMI
Orange Level
Joined: 12 Sep 2009
Location: South West Mich
Points: 2657
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Mar 2012 at 3:39pm |
|
Its a wd 20 disc. A little over eight foot wide. I only grow veggies and it is much heavier than my old one. Mostly it will be nice to be able to lift it and move it around easier. Nice to have all orange equipment now too.
|
|
captaindana
Orange Level
Joined: 14 Sep 2009
Location: Fort Plain, NY
Points: 2559
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Mar 2012 at 4:35pm |
|
Glock I use 7/16 bolts with a chain coupler on rach end of chain, I'll try n get pic instead of words.
|
|
captaindana
Orange Level
Joined: 14 Sep 2009
Location: Fort Plain, NY
Points: 2559
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Mar 2012 at 4:39pm |
Glock on the right lift arm if you zoom in you can see the repair link and through the top of it I have a 7/16 bolt with washers and a locknut. Works great. 
|
|
Glockhead SWMI
Orange Level
Joined: 12 Sep 2009
Location: South West Mich
Points: 2657
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Mar 2012 at 5:35pm |
|
That's how I got mine set up right now. Seems to work ok on the wd but pops out of the ca though. That's a nice looking disc. Wish mine was that nice!
|
|
Don(MI)
Orange Level
Joined: 15 Sep 2009
Location: Michigan
Points: 3887
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Mar 2012 at 6:36pm |
|
Hey, if you don't have to mess with the bearings at all, your already ahead in the ballgame! Have a #40 that needs bearings.
|
|
Galatians 5:22-24
"I got a pig at home in a pen and corn to feed him on, All I need is a pretty little girl to feed him when I'm gone!"
|
|
captaindana
Orange Level
Joined: 14 Sep 2009
Location: Fort Plain, NY
Points: 2559
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Mar 2012 at 6:42pm |
|
Glock I had a friend make decals for the back after this pic. Allis Chalmers 20 Series. These discs were in good shape when I bought them except the blades were worn thin and hitting rocks would split them. All new 20" cutter discs increased the weight dramatically! You sure don't want to be discing up a hill and lift them with the way my WD is set up!
|
|
Dipstick In
Orange Level
Joined: 11 Sep 2009
Location: Remington, In.
Points: 8602
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Mar 2012 at 7:11pm |
|
Glockhead, looking at your engine hoist, you really are a shadetree mechanic, aren't you??
|
|
You don't really have to be smart if you know who is!
|
|
Ray
Orange Level
Joined: 21 Sep 2009
Points: 1979
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Mar 2012 at 10:22pm |
|
I still have some used bearing. Maybe a few other disc parts. 785-353-2392
|
|
