| Author |
 Topic Search  Topic Options
|
tx091 
Bronze Level
Joined: 13 Feb 2011
Points: 33
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 190xt
Posted: 13 Feb 2011 at 9:38am |
|
Thge 190xt gas I use for Snowblowing starts hard, it fires but babbles around until it has a mind to start hitting on all 6. Then it is fine. If it is plugged in it also is fine. Appears now i have fouled a plug and will replace. Recently replace the cap, wires, points and condenser. I also run Heat in the winter to avoid freez up. Any ideas?
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21049
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Feb 2011 at 12:33pm |
|
Sounds like a typical 90 HP gas tractor to me.....hand on the choke knob for the first 10 or 15 minutes and then once warmed up OK fine.
|
|
49WF
Bronze Level
Joined: 06 Nov 2010
Location: S.D.
Points: 118
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Feb 2011 at 1:04pm |
|
I just came in from installing a pertronix conversion kit to electronic in the distributor. The old girl runs smooth now, shaft has to much play and it was hard to keep a good point gap.
|
|
More than I need
|
|
Josh(NE)
Orange Level
Joined: 12 Sep 2009
Location: Nebraska
Points: 510
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Feb 2011 at 11:03pm |
|
I had the same problem. Started adding octane booster to it instead of heat, problem solved.
|
|
Allis Express
'65 190XT, 37 B, '72 170, '83 8030, and the IH 560 was a mistake
|
|
SHAMELESS
Orange Level
Joined: 13 Sep 2009
Location: EAST NE
Points: 29486
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Feb 2011 at 12:24am |
|
how far back...age of tractor wise, can a person put that electronic ign on? do they have kits for all gassers?
|
|
Orange Blood
Orange Level
Joined: 29 Nov 2010
Location: ColoradoSprings
Points: 4053
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Feb 2011 at 6:42am |
 SHAMELESS wrote:
how far back...age of tractor wise, can a person put that electronic ign on? do they have kits for all gassers? |
I see them advertised for the WD and WD45 all the time, I imagine the 190 should have one out there somewhere.
Edited by Orange Blood - 14 Feb 2011 at 6:42am
|
|
Still in use:
HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060
Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7
|
|
49WF
Bronze Level
Joined: 06 Nov 2010
Location: S.D.
Points: 118
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Feb 2011 at 9:27am |
SHAMELESS wrote:
how far back...age of tractor wise, can a person put that electronic ign on? do they have kits for all gassers? |
Shameless, you can go to Pertronix web page and look up for tractor or distributor number .
|
|
More than I need
|
|
Lonn
Orange Level
Joined: 16 Sep 2009
Location: Назарово,Russia
Points: 29792
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Feb 2011 at 9:42am |
|
Dad's old XT gas was always a good starter in the cold. Never had a block heater until the mid 1990's but when it was real cold he used to cover it with a canvas and used a knipco heater to warm it up while we milked the cows just because he thought it was too hard on it to start when it was -20˚. Used it just to move round bales to be fed until I bought the D19 with an aftermarket 3-point.
|
|
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot
|
|
