Farm Equipment

Print Page | Close Window

190xt

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=25687
Printed Date: 25 Feb 2025 at 12:20pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190xt

Posted By: tx091
Subject: 190xt
Date Posted: 13 Feb 2011 at 9:38am

Thge 190xt gas I use for Snowblowing starts hard, it fires but babbles around until it has a mind to start hitting on all 6. Then it is fine. If it is plugged in it also is fine. Appears now i have fouled a plug and will replace. Recently replace the cap, wires, points and condenser. I also run Heat in the winter to avoid freez up. Any ideas?

Replies:

Posted By: DrAllis
Date Posted: 13 Feb 2011 at 12:33pm

Sounds like a typical 90 HP gas tractor to me.....hand on the choke knob for the first 10 or 15 minutes and then once warmed up OK fine.

Posted By: 49WF
Date Posted: 13 Feb 2011 at 1:04pm

I just came in from installing a pertronix conversion kit to electronic in the distributor. The old girl runs smooth now, shaft has to much play and it was hard to keep a good point gap.

-------------
More than I need

Posted By: Josh(NE)
Date Posted: 13 Feb 2011 at 11:03pm

I had the same problem. Started adding octane booster to it instead of heat, problem solved.

-------------
Allis Express
'65 190XT, 37 B, '72 170, '83 8030, and the IH 560 was a mistake

Posted By: SHAMELESS
Date Posted: 14 Feb 2011 at 12:24am

how far back...age of tractor wise, can a person put that electronic ign on? do they have kits for all gassers?

Posted By: Orange Blood
Date Posted: 14 Feb 2011 at 6:42am

SHAMELESS wrote:

how far back...age of tractor wise, can a person put that electronic ign on? do they have kits for all gassers?

I see them advertised for the WD and WD45 all the time, I imagine the 190 should have one out there somewhere.

-------------
Still in use:
HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060
Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7

Posted By: 49WF
Date Posted: 14 Feb 2011 at 9:27am

SHAMELESS wrote:

how far back...age of tractor wise, can a person put that electronic ign on? do they have kits for all gassers?

Shameless, you can go to Pertronix web page and look up for tractor or distributor number .

-------------
More than I need

Posted By: Lonn
Date Posted: 14 Feb 2011 at 9:42am

Dad's old XT gas was always a good starter in the cold. Never had a block heater until the mid 1990's but when it was real cold he used to cover it with a canvas and used a knipco heater to warm it up while we milked the cows just because he thought it was too hard on it to start when it was -20˚. Used it just to move round bales to be fed until I bought the D19 with an aftermarket 3-point.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot