This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Cube Van Weight |
Post Reply |
Author | |
BrianC,Ont
Orange Level Joined: 11 Sep 2009 Location: Belleville Ont Points: 903 |
Post Options
Thanks(0)
Posted: 01 May 2010 at 9:11pm |
The weight on the ownership says 4680 KG or 10,296 lbs. This seems a little high for a 2 wd 85 Ford cube van with a small block and a 14 ft fiberglass box. Maybe that was the weight with all the firefighting equip in it. I guess I will take it to the truck stop in the morning and weigh it.
|
|
Sponsored Links | |
LouSWPA
Orange Level Access Joined: 11 Sep 2009 Location: Clinton, Pa Points: 24406 |
Post Options
Thanks(0)
|
that sounds like the max gross weight
|
|
DaveKamp
Orange Level Access Joined: 12 Apr 2010 Location: LeClaire, Ia Points: 5816 |
Post Options
Thanks(0)
|
If you look in the door tag, you'll see the specified tire type, load range, and pressure, as well as the front axle rating (GAWF) and rear axle rating (GAWR) as well as the Gross Vehicle Weight Rating (GVW)... under no circumstances should you exceed either of these ratings, nor should you load it to those limits with tires of less capacity than recommeneded.
The weight of the vehicle, however, will be lighter. My experience for 'cube van' moving vans of the 10k GVW class, is that you'll have around 3500lbs on the steer axle, and about 3000 on the drive, for an empty of about 6500lbs... leaving you a capacity of around 3500lbs. Newer cube vans will be lighter, particularly if you have an aluminum body and a lightweight (single wheel) rear axle. Always put it on a scale to be certain, and note the amount of fuel onboard before weighing... good rule is to always weigh with full tanks, partly so you know for certain, and partly so that you don't have errors due to fuel motion. |
|
Allen Dilg
Orange Level Joined: 12 Sep 2009 Location: NE IL Points: 820 |
Post Options
Thanks(0)
|
Hello Brian I had one when I was a construction equipment mechanic for the tele co with tools wellder parts it weighted about 13000# I would also pull construction trailers to saftey lane or repair. It was the best service truck because everything was inside, and had a passageway door from cab to back and in the cold everything was warm.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |