This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
The Forum Parts and Services Unofficial Allis Store Tractor Shows Serial Numbers History
Forum Home Forum Home > Allis Chalmers > Farm Equipment
  New Posts New Posts
  FAQ FAQ  Forum Search   Events   Register Register  Login Login


Allis B throttle
 Post Reply Post Reply
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
john2189 View Drop Down
Silver Level
Silver Level


Joined: 11 Sep 2009
Location: Minerva,Ohio
Points: 304 		Post Options Post Options   Thanks (0) Thanks(0)   Quote john2189 Quote  Post ReplyReply Direct Link To This Post Topic: Allis B throttle
    Posted: 09 Mar 2024 at 7:23am
My throttle goes about halfway up before the engine starts to rev up. Is something worn out or does it need adjusting?
'41 Allis B
'45 Allis B
'49 Farmall Cub
'72 IH Cub
Back to Top
Sponsored Links


Back to Top
steve(ill) View Drop Down
Orange Level Access
Orange Level Access
Avatar

Joined: 11 Sep 2009
Location: illinois
Points: 81432 		Post Options Post Options   Thanks (0) Thanks(0)   Quote steve(ill) Quote  Post ReplyReply Direct Link To This Post Posted: 09 Mar 2024 at 8:05am
Push the lever to WIDE OPEN.... Check the governor arm to see that it is WIDE OPEN.... Look at the Carburetor lever to see if it is WIDE OPEN..... If everything on the governor and carb is adjusted right... go back to the lever, loosen the square set screw and push the 1/4 inch rod forward 1/4 inch and lock the screw back down...
Like them all, but love the "B"s.
Back to Top
john2189 View Drop Down
Silver Level
Silver Level


Joined: 11 Sep 2009
Location: Minerva,Ohio
Points: 304 		Post Options Post Options   Thanks (0) Thanks(0)   Quote john2189 Quote  Post ReplyReply Direct Link To This Post Posted: 09 Mar 2024 at 3:24pm
Originally posted by steve(ill) steve(ill) wrote:

Push the lever to WIDE OPEN.... Check the governor arm to see that it is WIDE OPEN.... Look at the Carburetor lever to see if it is WIDE OPEN..... If everything on the governor and carb is adjusted right... go back to the lever, loosen the square set screw and push the 1/4 inch rod forward 1/4 inch and lock the screw back down...

Ok everything you mention seems to be ok. Have not adjusted the rod yet, seems like a 1/4” wouldn’t do much. At idle position to 1/2 way does not change anything. At 1/2 it goes to full throttle. Nothing in between.
'41 Allis B
'45 Allis B
'49 Farmall Cub
'72 IH Cub
Back to Top
steve(ill) View Drop Down
Orange Level Access
Orange Level Access
Avatar

Joined: 11 Sep 2009
Location: illinois
Points: 81432 		Post Options Post Options   Thanks (0) Thanks(0)   Quote steve(ill) Quote  Post ReplyReply Direct Link To This Post Posted: 09 Mar 2024 at 6:06pm
I would assume an adjustment of the lever/ rod would fix that... If not, we can give directions on how to "SET" the governor to the carburetor linkage.
Like them all, but love the "B"s.
Back to Top
steve(ill) View Drop Down
Orange Level Access
Orange Level Access
Avatar

Joined: 11 Sep 2009
Location: illinois
Points: 81432 		Post Options Post Options   Thanks (0) Thanks(0)   Quote steve(ill) Quote  Post ReplyReply Direct Link To This Post Posted: 09 Mar 2024 at 6:10pm
STarting at the carburetor lever, there is a ROD that goes toward the radiator and pins to the GOVERNOR cross arm running behind the radiator to the governor.. Pull the carburetor ROD off the governor cross arm....

Push the hand THROTTLE lever (at the seat console) WIDE OPEN ( full forward).... see that the lever / spring on the governor has been stroked FULL OPEN ( spring stretched)....

Now go to the carburetor and pull the ROD full forward toward that Governor cross arm that you disconnected.. ( make sure the rod moves smoothly from the stop to full forward. Make sure the carb ARM is not dragging on the engine block wall....pull the ROD all the way forward... See that the carb ROD lines up with the HOLE in the gov cross arm.. If not, BEND the arm forward or back until the rod just lines up, and reinstall... test again.


Edited by steve(ill) - 09 Mar 2024 at 6:13pm
Like them all, but love the "B"s.
Back to Top
john2189 View Drop Down
Silver Level
Silver Level


Joined: 11 Sep 2009
Location: Minerva,Ohio
Points: 304 		Post Options Post Options   Thanks (0) Thanks(0)   Quote john2189 Quote  Post ReplyReply Direct Link To This Post Posted: 09 Mar 2024 at 8:05pm
Thanks Steve. Sunday will be a busy day, but I will check it Monday.
'41 Allis B
'45 Allis B
'49 Farmall Cub
'72 IH Cub
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 11.10
Copyright ©2001-2017 Web Wiz Ltd.

This page was generated in 0.063 seconds.


Help Support the
Unofficial Allis Forum