B Engine Cylinder Head Performance

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Ryan: It may not be necessary for you, with out turning much speed, although the added spring pressure may require stronger pushrods. I use Dodge 225 slat 6 ones that I shorten just a tad. After that I've never bent anymore. The stock pushrods will bend just because sometimes. They were not designed to run at the speeds I'm running or with the boost pressure. With anything, after you go beyond the design tolerance you will find the first weak link. After upgrading that, you will find the next weak link. This is what us tractor pullers are constantly doing.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
PaulB Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 12 Sep 2009 Location: Rocky Ridge Md Points: 4762	Post Options Post Reply Quote PaulB Report Post Thanks(0) Quote Reply Posted: 26 Jun 2016 at 7:22am
	Ryan: It may not be necessary for you, with out turning much speed, although the added spring pressure may require stronger pushrods. I use Dodge 225 slat 6 ones that I shorten just a tad. After that I've never bent anymore. The stock pushrods will bend just because sometimes. They were not designed to run at the speeds I'm running or with the boost pressure. With anything, after you go beyond the design tolerance you will find the first weak link. After upgrading that, you will find the next weak link. This is what us tractor pullers are constantly doing.
	If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY

Sponsored Links

Ryan59 Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 30 May 2016 Location: Kansas Points: 68	Post Options Post Reply Quote Ryan59 Report Post Thanks(0) Quote Reply Posted: 26 Jun 2016 at 2:02pm
	Thanks Paul, I appreciate the response. Is there enough material to move the pushrod hole over? I understand about the valve springs RPM.s and not needing any of this stuff. The tractor I am working on is not a cream puff, it never will be. Someone with a blow torch loved to use it. Although he did blow a hole through the torque tube to mount a Mopar starter, he used the torch to drill holes, trim small things, make a Frankenstein bracket for the alternator. I have removed some of his handy work. But understand that I am not beating up this tractor anything close to what the torch guy did. I have the time and "some" knowledge to work on this valve trane IF it's possible to move the pushrod holes over without breaking through a water jacket. I was going to just throw the head back on and go but the more I look at the cylinder liners the worse they seem to get..... " border="">

PaulB Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 12 Sep 2009 Location: Rocky Ridge Md Points: 4762	Post Options Post Reply Quote PaulB Report Post Thanks(0) Quote Reply Posted: 27 Jun 2016 at 6:48am
	I have never tried to move the pushrod holes over. I've always found the OEM rockers to do the job intended even with the high RPMs, extra spring pressure and boost that I run. I also feel that steel or iron rockers are superior and durable to aluminum for anything other than extreme (10,000+) RPM. I have enlarged the holes on some heads to used the larger Dodge pushrods and not had a problem for what was need to stop rubbing.
	If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY