| Author |
 Topic Search  Topic Options
|
Charlie175 
Orange Level
Joined: 11 Sep 2009
Location: Shenandoah, VA
Points: 6358
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 360 out of a 226
Posted: 15 Oct 2013 at 7:31am |
|
How much stroke does a 226 take to get 360 cubes?
|
|
Charlie
'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20547
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Oct 2013 at 8:19am |
|
Bore of 4.630" and stroke of 5.375" gets you 362. Cannot stroke a 4 inch bore enough to get 360.
|
|
WildBill
Silver Level
Joined: 26 Aug 2012
Location: Mandan,ND
Points: 190
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Oct 2013 at 8:26am |
murphysmotorservice.com
go to murphys website and use his topic shop math.. pretty easy to use and find the math for cubes and rod lengths etc. !! Jeff is a good guy to deal with . i use his rockers on all my pullers !
good luck Charlie 175 !!
|
|
Allis fan for life ! B,C,2-WC'S,WD45G,D19G,190xt ,LLSS 8010, terra tiger refurbished
|
|
Charlie175
Orange Level
Joined: 11 Sep 2009
Location: Shenandoah, VA
Points: 6358
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Oct 2013 at 8:48am |
Thank you.
I must have heard wrong, I guess he said 260 which would be 4x5.25 Is this a common stroke?
As you can tell I know little about stroking rods and such.
|
|
Charlie
'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD
|
|
WildBill
Silver Level
Joined: 26 Aug 2012
Location: Mandan,ND
Points: 190
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Oct 2013 at 8:58am |
|
no replacement for displacement ! hee hee...
|
|
Allis fan for life ! B,C,2-WC'S,WD45G,D19G,190xt ,LLSS 8010, terra tiger refurbished
|
|
wi50
Orange Level
Joined: 24 Sep 2010
Location: weegieland
Points: 1010
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Oct 2013 at 9:05am |
|
I've put togather a few cheaper engines for guys at 4.155 bore and 4.28 bore and 5.4" stroke doe 295 and 310 cid. These engines don't require verry expensive parts and little machine work. Then I've put togather some pretty expensive ones with billet parts.
An offset ground crank and some Buda rods would get 4.85" stroke by the time the crank is cleaned up, with a 4.125 typical overbore sleeve would get a 260 cid engine.
|
|
"see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet"
|
|
d17brown
Orange Level
Joined: 11 Sep 2009
Location: farley iowa
Points: 1689
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Oct 2013 at 8:33pm |
|
I have 4.7 bore and 6 inch stroke in a 226 block
|
|
phil
|
|
