Pulling Forum - 360 out of a 226

Print Page | Close Window

360 out of a 226

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=78672
Printed Date: 27 Nov 2024 at 9:25pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 360 out of a 226

Posted By: Charlie175
Subject: 360 out of a 226
Date Posted: 15 Oct 2013 at 7:31am

How much stroke does a 226 take to get 360 cubes?

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Replies:

Posted By: DrAllis
Date Posted: 15 Oct 2013 at 8:19am

Bore of 4.630" and stroke of 5.375" gets you 362. Cannot stroke a 4 inch bore enough to get 360.

Posted By: WildBill
Date Posted: 15 Oct 2013 at 8:26am

murphysmotorservice.com

go to murphys website and use his topic shop math.. pretty easy to use and find the math for cubes and rod lengths etc. !! Jeff is a good guy to deal with . i use his rockers on all my pullers !

good luck Charlie 175 !!

-------------
Allis fan for life ! B,C,2-WC'S,WD45G,D19G,190xt ,LLSS 8010, terra tiger refurbished

Posted By: Charlie175
Date Posted: 15 Oct 2013 at 8:48am

Thank you.

I must have heard wrong, I guess he said 260 which would be 4x5.25

Is this a common stroke?

As you can tell I know little about stroking rods and such.

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Posted By: WildBill
Date Posted: 15 Oct 2013 at 8:58am

no replacement for displacement ! hee hee...

-------------
Allis fan for life ! B,C,2-WC'S,WD45G,D19G,190xt ,LLSS 8010, terra tiger refurbished

Posted By: wi50
Date Posted: 15 Oct 2013 at 9:05am

I've put togather a few cheaper engines for guys at 4.155 bore and 4.28 bore and 5.4" stroke doe 295 and 310 cid. These engines don't require verry expensive parts and little machine work. Then I've put togather some pretty expensive ones with billet parts.

An offset ground crank and some Buda rods would get 4.85" stroke by the time the crank is cleaned up, with a 4.125 typical overbore sleeve would get a 260 cid engine.

-------------
"see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet"

Posted By: d17brown
Date Posted: 15 Oct 2013 at 8:33pm

I have 4.7 bore and 6 inch stroke in a 226 block

-------------
phil