![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
360 out of a 226 |
Post Reply ![]() |
Author | |
Charlie175 ![]() Orange Level ![]() Joined: 11 Sep 2009 Location: Shenandoah, VA Points: 6358 |
![]() ![]() ![]() ![]() ![]() Posted: 15 Oct 2013 at 7:31am |
How much stroke does a 226 take to get 360 cubes?
|
|
Charlie
'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
|
![]() |
|
Sponsored Links | |
![]() |
|
DrAllis ![]() Orange Level Access ![]() Joined: 12 Sep 2009 Points: 21022 |
![]() ![]() ![]() ![]() ![]() |
Bore of 4.630" and stroke of 5.375" gets you 362. Cannot stroke a 4 inch bore enough to get 360.
|
|
![]() |
|
WildBill ![]() Silver Level ![]() ![]() Joined: 26 Aug 2012 Location: Mandan,ND Points: 190 |
![]() ![]() ![]() ![]() ![]() |
murphysmotorservice.com
go to murphys website and use his topic shop math.. pretty easy to use and find the math for cubes and rod lengths etc. !! Jeff is a good guy to deal with . i use his rockers on all my pullers !
good luck Charlie 175 !!
|
|
Allis fan for life ! B,C,2-WC'S,WD45G,D19G,190xt ,LLSS 8010, terra tiger refurbished
|
|
![]() |
|
Charlie175 ![]() Orange Level ![]() Joined: 11 Sep 2009 Location: Shenandoah, VA Points: 6358 |
![]() ![]() ![]() ![]() ![]() |
Thank you.
I must have heard wrong, I guess he said 260 which would be 4x5.25 Is this a common stroke? As you can tell I know little about stroking rods and such.
|
|
Charlie
'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
|
![]() |
|
WildBill ![]() Silver Level ![]() ![]() Joined: 26 Aug 2012 Location: Mandan,ND Points: 190 |
![]() ![]() ![]() ![]() ![]() |
no replacement for displacement ! hee hee...
|
|
Allis fan for life ! B,C,2-WC'S,WD45G,D19G,190xt ,LLSS 8010, terra tiger refurbished
|
|
![]() |
|
wi50 ![]() Orange Level ![]() Joined: 24 Sep 2010 Location: weegieland Points: 1010 |
![]() ![]() ![]() ![]() ![]() |
I've put togather a few cheaper engines for guys at 4.155 bore and 4.28 bore and 5.4" stroke doe 295 and 310 cid. These engines don't require verry expensive parts and little machine work. Then I've put togather some pretty expensive ones with billet parts.
An offset ground crank and some Buda rods would get 4.85" stroke by the time the crank is cleaned up, with a 4.125 typical overbore sleeve would get a 260 cid engine. |
|
"see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet"
|
|
![]() |
|
d17brown ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: farley iowa Points: 1698 |
![]() ![]() ![]() ![]() ![]() |
I have 4.7 bore and 6 inch stroke in a 226 block
|
|
phil
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |