| Author |
 Topic Search  Topic Options
|
PaulB 
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4753
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: ? For 190XT pullers
Posted: 14 Sep 2018 at 7:26pm |
|
What gear are you using for field stock tractors? 18.4x34 tires with good tread, full set of pie weights, front starter with 3 extra add ons.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
 |
|
Sponsored Links
|
|
|
grinder220
Orange Level
Joined: 11 Jan 2012
Location: Clinton Iowa
Points: 2342
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Sep 2018 at 8:12pm |
|
When I pulled mine 2nd gear was the best choice in the 9000 lb. farm stock class
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20543
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Sep 2018 at 10:33pm |
|
2nd transmission gear (3rd and 4th speed) right ???
|
|
LionelinKY
Orange Level
Joined: 12 Sep 2009
Location: Radcliff,KY
Points: 695
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Sep 2018 at 12:28am |
|
Track can make a difference. Most times I used 2nd on the floor shift. A couple of times I had to use 1st though.
|
|
"My name is Lionel and I'm an Allisoholic"
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4753
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Sep 2018 at 5:11am |
|
Ok, 2nd gear in the transmission seems to be the consensus. What position for the Power-Director, Hi or Low?
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20543
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Sep 2018 at 6:12am |
|
You will weigh more than 10,000 lbs so play it safe and run low side. There's a big diff between 95 HP and those that run 115 HP.
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4753
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Sep 2018 at 6:59pm |
|
Thanks to everyone for getting me in the proper gear. This is the fairboards tractor and I’ve only ran it to work the track at the pulls at the fairgrounds. Today was the farm stock pull along with the minirods. I recieved many complements on how well the 190 preformed. It pulled 280’ and some inches to win the 9500 pound class. As many times as I’ve ran it working the track, I’d never noticed that it doesn’t have the starter weight out front, just the three little slabs. Normally I’m not able to atted the Sunday pull, because I have to turn in early to get started at work about midnight. Today was a lot of fun. I’ll plan my vacation for the same week again next year.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
