? For 190XT pullers
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=153980
Printed Date: 22 Nov 2024 at 10:31pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: ? For 190XT pullers
Posted By: PaulB
Subject: ? For 190XT pullers
Date Posted: 14 Sep 2018 at 7:26pm
What gear are you using for field stock tractors? 18.4x34 tires with good tread, full set of pie weights, front starter with 3 extra add ons.
-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
Replies:
Posted By: grinder220
Date Posted: 14 Sep 2018 at 8:12pm
|
When I pulled mine 2nd gear was the best choice in the 9000 lb. farm stock class
|
Posted By: DrAllis
Date Posted: 14 Sep 2018 at 10:33pm
|
2nd transmission gear (3rd and 4th speed) right ???
|
Posted By: LionelinKY
Date Posted: 15 Sep 2018 at 12:28am
Track can make a difference. Most times I used 2nd on the floor shift. A couple of times I had to use 1st though.
-------------
"My name is Lionel and I'm an Allisoholic"
|
Posted By: PaulB
Date Posted: 15 Sep 2018 at 5:11am
Ok, 2nd gear in the transmission seems to be the consensus. What position for the Power-Director, Hi or Low?
-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
Posted By: DrAllis
Date Posted: 15 Sep 2018 at 6:12am
|
You will weigh more than 10,000 lbs so play it safe and run low side. There's a big diff between 95 HP and those that run 115 HP.
|
Posted By: PaulB
Date Posted: 16 Sep 2018 at 6:59pm
Thanks to everyone for getting me in the proper gear. This is the fairboards tractor and I’ve only ran it to work the track at the pulls at the fairgrounds. Today was the farm stock pull along with the minirods. I recieved many complements on how well the 190 preformed. It pulled 280’ and some inches to win the 9500 pound class. As many times as I’ve ran it working the track, I’d never noticed that it doesn’t have the starter weight out front, just the three little slabs. Normally I’m not able to atted the Sunday pull, because I have to turn in early to get started at work about midnight. Today was a lot of fun. I’ll plan my vacation for the same week again next year.
-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|