Rock Auto

Would Rock Auto be a source for gaskets? WD tractor

got a set at NAPA; auto parts last week all worked well.

My experience with Rock Auto is a lot like most of the auto parts chains (at least in our area). If they can't look a part up solely by application (i.e. 1999 Ford F-250 XLT with engine), they have no idea how to find it.

I have much better luck going to a regular auto parts store or even cross referencing parts on the internet.

The part number trick does work. I was hoping to find more part numbers that work. I have found a few parts form this "Auto" store that fit on my "Tractor". Parts are hard to find, so I look at many possible sources. Thanks for the input. Smile

Here's a funny story. I had a rearend axle bearing starting to growl in the back of my 29 pickup. I used an 8" Ford rear out of a Maverick. (fits perfect under a Model A) Sooo, I figured I'd better just bring the whole axle in with the bearing so I have somethin' for show n' tell just in case there's a problem. Well, the problem I was figuring was that they won't have the bearing for a 77 Maverick rear. When I put the axle up on the counter, I said to the young lad behind the counter, "I need an axle bearing for a 77' Maverick". I knew I was in trouble when he had that deer in the Headlights look. He said "I'm sorry sir, who makes a Maverick?" Just at that time an older gent like myself comes out of one of the aisles and yells at the young lad "Ford makes the Maverick"!! I young lad turned and looked at the old gent and said. "Geeeez, I didn't know", "that was before my time". I looked at that young feller and said "son ya make me feel old". They actually did have the bearing in stock so I was good to go...

Steve@B&B

39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife

Well Steve these days you have to tell them every little detail ,or do 1/2 their job for them by giving them a part # so they can see if they have a part .

He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.

Thanks for the replies. A little back ground about me. I stock many items so they are available for folks in the area. My current supplier has a gasket back ordered and need to get some on the shelf. Hard for me to buy something for $15 and sell it for $12. I shop so others don't have to.

Lon, If you're interested..I can forward you the Mahle master catalog for all allis engines...everything from the u to D3750 MKII engines. Mahle part numbers are the same as Victor, and Victor numbers cross well to fel Pro. Victor Reinz are widely available also. I'm glad the part # trick worked for you, its fairly simple..and nothing any different than you have to do at the dealer nowadays when dealing on the old engines. BTW..Mahle master catalog lists, gaskets, valves, cylinder liners, valve seats..all kinds of parts. It's invaluable as far as I am concerned!!

Edited by Mfam8 - 25 Jan 2021 at 2:45pm

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Lon(MN) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 11 Sep 2009 Location: Elk River,MN Points: 1968	Post Options Post Reply Quote Lon(MN) Report Post Thanks(0) Quote Reply Topic: Rock Auto Posted: 20 Jan 2021 at 8:21am
	Would Rock Auto be a source for gaskets? WD tractor

Sponsored Links

Mfam8 Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Access Joined: 04 Aug 2019 Location: Midwest Points: 221	Post Options Post Reply Quote Mfam8 Report Post Thanks(0) Quote Reply Posted: 20 Jan 2021 at 9:08am
	hs7514s is the fel pro number for the g201 head set. They do show QOH of 1, at $40.79 -however this same exact head set is available at autozone for $42.49 on a 1 day order as well, with no shipping cost. Much simpler that way, and for 2 bucks..id just go to the parts store Edited by Mfam8 - 20 Jan 2021 at 9:10am

dawntreader74 Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 28 Oct 2013 Location: Manteno Points: 1770	Post Options Post Reply Quote dawntreader74 Report Post Thanks(0) Quote Reply Posted: 20 Jan 2021 at 7:49pm
	got a set at NAPA; auto parts last week all worked well.

SteveM C/IL Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Location: Shelbyville IL Points: 8239	Post Options Post Reply Quote SteveM C/IL Report Post Thanks(0) Quote Reply Posted: 22 Jan 2021 at 11:23pm
	"Rock auto" not rock tractor....not in their listing.

WF owner Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 12 May 2013 Location: Bombay NY Points: 4664	Post Options Post Reply Quote WF owner Report Post Thanks(0) Quote Reply Posted: 23 Jan 2021 at 6:46am
	My experience with Rock Auto is a lot like most of the auto parts chains (at least in our area). If they can't look a part up solely by application (i.e. 1999 Ford F-250 XLT with engine), they have no idea how to find it. I have much better luck going to a regular auto parts store or even cross referencing parts on the internet.

Mfam8 Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Access Joined: 04 Aug 2019 Location: Midwest Points: 221	Post Options Post Reply Quote Mfam8 Report Post Thanks(0) Quote Reply Posted: 23 Jan 2021 at 1:45pm
	If you have the part number they actually do, Steve. You go to the home screen, and above the little flags, just to the right..use "part number search" Type in HS7514s- VOILA!

Lon(MN) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 11 Sep 2009 Location: Elk River,MN Points: 1968	Post Options Post Reply Quote Lon(MN) Report Post Thanks(0) Quote Reply Posted: 24 Jan 2021 at 8:03am
	The part number trick does work. I was hoping to find more part numbers that work. I have found a few parts form this "Auto" store that fit on my "Tractor". Parts are hard to find, so I look at many possible sources. Thanks for the input.

Gary Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 13 Sep 2009 Location: Peterborough,On Points: 5378	Post Options Post Reply Quote Gary Report Post Thanks(0) Quote Reply Posted: 24 Jan 2021 at 8:10am
	If you try the Allis P/N on Ebay or Amazon, sometimes it gives you a cross-reference number.

Steve in NJ Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Location: Andover, NJ Points: 11791	Post Options Post Reply Quote Steve in NJ Report Post Thanks(0) Quote Reply Posted: 24 Jan 2021 at 8:45am
	Here's a funny story. I had a rearend axle bearing starting to growl in the back of my 29 pickup. I used an 8" Ford rear out of a Maverick. (fits perfect under a Model A) Sooo, I figured I'd better just bring the whole axle in with the bearing so I have somethin' for show n' tell just in case there's a problem. Well, the problem I was figuring was that they won't have the bearing for a 77 Maverick rear. When I put the axle up on the counter, I said to the young lad behind the counter, "I need an axle bearing for a 77' Maverick". I knew I was in trouble when he had that deer in the Headlights look. He said "I'm sorry sir, who makes a Maverick?" Just at that time an older gent like myself comes out of one of the aisles and yells at the young lad "Ford makes the Maverick"!! I young lad turned and looked at the old gent and said. "Geeeez, I didn't know", "that was before my time". I looked at that young feller and said "son ya make me feel old". They actually did have the bearing in stock so I was good to go... Steve@B&B
	39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife

Ted J Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 05 Jul 2010 Location: La Crosse, WI Points: 18821	Post Options Post Reply Quote Ted J Report Post Thanks(0) Quote Reply Posted: 24 Jan 2021 at 5:44pm
	Take a look here Lon..... Yes, we do offer gaskets for Allis-Chambers. Here’s a link to our engine parts search. - https://drivcat.com/engine.aspx
	"Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17

Fred in Pa Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 13 Sep 2009 Location: Hanover Pa. Points: 9210	Post Options Post Reply Quote Fred in Pa Report Post Thanks(0) Quote Reply Posted: 25 Jan 2021 at 6:56am
	Well Steve these days you have to tell them every little detail ,or do 1/2 their job for them by giving them a part # so they can see if they have a part .
	He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED.

PaulB Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 12 Sep 2009 Location: Rocky Ridge Md Points: 4736	Post Options Post Reply Quote PaulB Report Post Thanks(0) Quote Reply Posted: 25 Jan 2021 at 7:24am
	Just call someplace like Sandy Lake Implement and talk to a knowledgeable counter person like Brenda and quit wasting your time with those dumba$$es that couldn't pour water out of a boot with the instructions on the heel. What you need will be at your door in a day or so, without the aggravation of hearing "That's not in the computer" or "We can order it"
	If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY

Lon(MN) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 11 Sep 2009 Location: Elk River,MN Points: 1968	Post Options Post Reply Quote Lon(MN) Report Post Thanks(0) Quote Reply Posted: 25 Jan 2021 at 8:53am
	Thanks for the replies. A little back ground about me. I stock many items so they are available for folks in the area. My current supplier has a gasket back ordered and need to get some on the shelf. Hard for me to buy something for $15 and sell it for $12. I shop so others don't have to.

polarbear Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 05 Jul 2016 Location: addieville il Points: 331	Post Options Post Reply Quote polarbear Report Post Thanks(0) Quote Reply Posted: 25 Jan 2021 at 12:58pm
	AGCO dealer

Mfam8 Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Access Joined: 04 Aug 2019 Location: Midwest Points: 221	Post Options Post Reply Quote Mfam8 Report Post Thanks(0) Quote Reply Posted: 25 Jan 2021 at 2:43pm
	Lon, If you're interested..I can forward you the Mahle master catalog for all allis engines...everything from the u to D3750 MKII engines. Mahle part numbers are the same as Victor, and Victor numbers cross well to fel Pro. Victor Reinz are widely available also. I'm glad the part # trick worked for you, its fairly simple..and nothing any different than you have to do at the dealer nowadays when dealing on the old engines. BTW..Mahle master catalog lists, gaskets, valves, cylinder liners, valve seats..all kinds of parts. It's invaluable as far as I am concerned!! Edited by Mfam8 - 25 Jan 2021 at 2:45pm

Lon(MN) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 11 Sep 2009 Location: Elk River,MN Points: 1968	Post Options Post Reply Quote Lon(MN) Report Post Thanks(0) Quote Reply Posted: 26 Jan 2021 at 6:58am
	That would be great if you could forward that file. lselkriver@gmail.com is the email.