CA PTO Sounds Like a Gatling Gun

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Or More appropriately the hydraulic pump sounds like this. 
1951 CA 

Had the Pto housing off to replace gasket. I also disassembled and cleaned the hydraulic pump. I took alot of pictures during disassembly and used shop manual for assembly on the hydraulic pump. Pulled alot of sludge out of it. 

upon reassembly, the pto works fine when the hydraulic lift arm is in the down position. When in the rams extended, or up position, it chatters and sounds like a gatling gun and the belt pulley get a whin to it.

once this happens, the pto engagement lever will not disengage unless it is reversed (assuming taking tension off the hydraulic pump cams)

I inquired at a shop and was told it is the pressure relief valve that is making that noise, however it did not do this before cleaning, and also doesn't sounds right since it does not go away regardless of where the lift arm is besides the down position. 

unfortunately I found this after getting the fenders and deck back on the machine. expecting to take these back off, drain, and inspect. 

thanks for any insight 

Edited by mosstrumpet - 25 Mar 2024 at 4:17pm

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
mosstrumpet Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 19 Jul 2021 Location: South Carolina Points: 18	Post Options Post Reply Quote mosstrumpet Report Post Thanks(0) Quote Reply Topic: CA PTO Sounds Like a Gatling Gun Posted: 25 Mar 2024 at 3:02pm
	Or More appropriately the hydraulic pump sounds like this. 1951 CA Had the Pto housing off to replace gasket. I also disassembled and cleaned the hydraulic pump. I took alot of pictures during disassembly and used shop manual for assembly on the hydraulic pump. Pulled alot of sludge out of it. upon reassembly, the pto works fine when the hydraulic lift arm is in the down position. When in the rams extended, or up position, it chatters and sounds like a gatling gun and the belt pulley get a whin to it. once this happens, the pto engagement lever will not disengage unless it is reversed (assuming taking tension off the hydraulic pump cams) I inquired at a shop and was told it is the pressure relief valve that is making that noise, however it did not do this before cleaning, and also doesn't sounds right since it does not go away regardless of where the lift arm is besides the down position. unfortunately I found this after getting the fenders and deck back on the machine. expecting to take these back off, drain, and inspect. thanks for any insight Edited by mosstrumpet - 25 Mar 2024 at 4:17pm

Sponsored Links

Jim.ME Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 19 Nov 2016 Location: Maine Points: 952	Post Options Post Reply Quote Jim.ME Report Post Thanks(0) Quote Reply Posted: 25 Mar 2024 at 4:09pm
	Helps to tell what tractor this is on.

mosstrumpet Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 19 Jul 2021 Location: South Carolina Points: 18	Post Options Post Reply Quote mosstrumpet Report Post Thanks(0) Quote Reply Posted: 25 Mar 2024 at 4:17pm
	Thanks for pointing that out. I completely forgot to add that info. It is a 1951 CA. I updated the post to reflect this as well.

steve(ill) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 81108	Post Options Post Reply Quote steve(ill) Report Post Thanks(0) Quote Reply Posted: 25 Mar 2024 at 7:04pm
	When you engage the PTO lever the PTO shaft spins and the Hydraulic pump turns and pumps oil back to sump... When you pull the Hyd lever, you direct the oil to the cylinders.. Seems like the pump is working ... BUT when you pull the lever the "noise" starts.. So i would think that means the pump is dead headed.. I would think something got assembled wrong.. If it was the RELIEF Valve, the cylinder would extend, then RELIEF when you hit full pressure at the end of stroke.... unless you blocking 90% of the port to the cylinder and building up pressure in the valve and pop the relief... But either way, something is assembled wrong..
	Like them all, but love the "B"s.

steve(ill) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 81108	Post Options Post Reply Quote steve(ill) Report Post Thanks(0) Quote Reply Posted: 25 Mar 2024 at 7:06pm
	The adjusting screws and arms on the OUTSIDE of the valve were not "readjusted" and bottomed out ???
	Like them all, but love the "B"s.