This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
pulling tirre pressure |
Post Reply |
Author | |
Ken in Texas
Orange Level Joined: 11 Sep 2009 Location: Henderson, TX Points: 5919 |
Post Options
Thanks(0)
Posted: 28 Mar 2024 at 10:46pm |
i pul my farm stock CA in second gear , 13-6 fFrestones. What tire pressure is best under all track conditions.
|
|
Sponsored Links | |
dgerth
Bronze Level Joined: 27 Nov 2012 Location: NC Wash Points: 172 |
Post Options
Thanks(0)
|
Geeze Ken, a loaded ? if ever man!!!
FYI, I start at 6 and go up or down as needed. Not one pressure is good for all. These are just MY opines that work for me. Good luck my friend, dan
|
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20697 |
Post Options
Thanks(0)
|
Rim width, tractor weight, lug height, lug sharpness, tire speed, etc, etc, etc ALL EFFECT what is the best tire pressure for your tractor. Let us know where you wind up !!!
|
|
PaulB
Orange Level Joined: 12 Sep 2009 Location: Rocky Ridge Md Points: 4782 |
Post Options
Thanks(0)
|
There is no "one size fits all". Every track is different. Weight changes will affect the optimum tire pressure. You have to look at your tire track after pulling away from the sled, dipped in = too much, humped up = too little. Experience is your best guideline.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
|
injpumpEd
Orange Level Access Joined: 13 Sep 2009 Location: Walnut IL Points: 4932 |
Post Options
Thanks(0)
|
For us big heavy tractors, like 11,000, 12,000 etc, we kinda use the generic rule of 1.5 psi per 1000 lbs wt. So my 11,000 tractor generally runs 16.5, adjust from there, this is radials, but may be a starting point for anyone. So a light 5000# would run 7.5psi. etc.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |