Trying to find theproblem with the 7080. Was using it 2.5 years ago to mow barley with the discbine. Heard a clicking noise that progressively got worse in the transmission- had to get it mowed so we kept going
.. by the end of the field it was more of a popping noise and you could feel it. Had to haul it home, had 1st and reverse to load with, went to back it in the shop and it was completely bound up. I believe I tried the shifter in every gear..let clutch out would stall engine. Got it split, pulled power director, shim between clutch packs was riding on the splined input shaft, but other than that looks ok. Put a bar on countershaft, wont budge. Trying to remove input shaft carrier assembly from front of transmision and I got it to come out about 3/8" but it just wants to rock back and forth with 2 rolling head prybars behind it. Have all 6 bolts out (one was broke off flush) also have 4" nut off. Have a posi lock puller, but cant get jaws behind it yet, but dont want to bust anything or squish the pto shaft needle bearing. Im thinking to destroy the bearing around the hollow shaft in order to get the housing off..?
Topic Options
Post Options
Thanks(0)
