| Author |
 Topic Search  Topic Options
|
Thad in AR. 
Orange Level Access
Joined: 12 Sep 2009
Location: Arkansas
Points: 9561
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: trip bucket to hydraulic?
Posted: 05 Apr 2011 at 6:20am |
|
I'm looking at a wd45 with a loader but no bucket. can I use the tractors hydraulic system to use the lift and a hydraulic dump? If so what all would I need?
|
 |
|
Sponsored Links
|
|
|
omahagreg
Orange Level Access
Joined: 11 Sep 2009
Location: Omaha, Nebraska
Points: 2806
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Apr 2011 at 6:41am |
|
The tractor hydraulics do not give any down pressure, it just releases the pressure and gravity does the rest. Might make the bucket a little less useful that way. Most times, a whole new system is added if you want it all hydraulic.
|
|
Greg Kroeker
1950 WD with wide front and Freeman trip loader
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 23750
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Apr 2011 at 7:01am |
|
You could plumb in a double acting cylinder and valve to control the bucket.Have to get the right cylinder( high pressure,low volume on tractor). Won't be cheap to do, lines, cylinder, valve,fittings,etc. probably $500 and time.
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
dave63
Orange Level
Joined: 01 Feb 2011
Location: Lineboro Md
Points: 2382
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Apr 2011 at 7:09am |
|
What you need is a dual action spool valve. if the cylinders have fittings on the oppaset end from the supply you may be able to take out the vents and hose it to the spool valve. this would convert the cylinders from single action to dual action. then add dual action tilt cylinders to the bucket. this will require some fabrication and a bunch of plumbing. you can use the tractors hydraulic pump but the loader will work slow. you may want to add a high capacity pump. I use to help dad put loaders on tractors, we use to make loader mount brackets, hyd. pump mounts, spool valve mounts etc. we put about any loader on any tractor.
|
|
The universal answer to all questions is yes, how much do you want to spend?
|
|
