| Author |
 Topic Search  Topic Options
|
LouSWPA 
Orange Level Access
Joined: 11 Sep 2009
Location: Clinton, Pa
Points: 24274
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: anybody have a rule of thumb
Posted: 11 Nov 2024 at 2:05pm |
for required HP for a given hydraulic pump?
For instance, what would a 2500psi 12gal/min pump require?
Edited by LouSWPA - 11 Nov 2024 at 2:06pm
|
|
I am still confident of this;
I will see the goodness of the Lord in the land of the living.
Wait for the Lord;
be strong and take heart and wait for the Lord. Ps 27
|
 |
|
Sponsored Links
|
|
|
DiyDave
Orange Level Access
Joined: 11 Sep 2009
Location: Gambrills, MD
Points: 51721
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 Nov 2024 at 3:18pm |
http://www.metaris.com/hp-calculator.php
17.503 per the above calculator... 
Edited by DiyDave - 11 Nov 2024 at 3:19pm
|
|
Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!
|
|
LouSWPA
Orange Level Access
Joined: 11 Sep 2009
Location: Clinton, Pa
Points: 24274
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 Nov 2024 at 4:49pm |
|
|
|
I am still confident of this;
I will see the goodness of the Lord in the land of the living.
Wait for the Lord;
be strong and take heart and wait for the Lord. Ps 27
|
|
SteveM C/IL
Orange Level Access
Joined: 12 Sep 2009
Location: Shelbyville IL
Points: 8244
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Nov 2024 at 11:02am |
|
Upsize Lou. Need 50 horse
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 22485
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Nov 2024 at 11:44am |
ROT...... you'll need 7 more HP than you've got
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
KJCHRIS
Orange Level
Joined: 21 Dec 2015
Location: WC Iowa
Points: 908
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Nov 2024 at 7:41pm |
|
Not sure what hydraulic suppliers still have charts for that kind of thing. a decade ago Baum Hydraulics , Omaha, Ne. had a chart in their catalog online. Listed gear, vane, piston/ open & closed center pumps. I'm sure there's still a company with a similar online chart. They also had chart showing how much PSI and piston diameter of cylinder to lift "X" pounds.
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20534
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Nov 2024 at 9:27pm |
|
When would a hydraulic system ever be operated at full 2500 psi continuously ?? A series four D-17 hydraulic system not doing any work and engine running wide open throttle takes less than 1 HP to circulate 12 GPM of oil at 100 psi. When you hit the end of a hydraulic cylinders stroke and don't let the hyd lever cancel to HOLD, the relief valve opens (2,200 psi takes 15 HP) and then makes the engine labor. So it's only a momentary 15 HP load.
|
|
Clay
Orange Level
Joined: 11 Sep 2009
Location: Udall, Kansas
Points: 9342
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Nov 2024 at 9:41pm |
|
0.06 x Horse Power = GPH [approximately]
Edited by Clay - 12 Nov 2024 at 9:44pm
|
|
DiyDave wrote: