This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
FL50 spongy brakes unless pumped |
Post Reply |
Author | |
pescadoman
Bronze Level Joined: 29 Sep 2023 Location: ventura Points: 28 |
Post Options
Thanks(0)
Posted: 29 Sep 2023 at 7:33pm |
I swear I tried the search function, but received no hits. I just picked up an FL50 forklift and was warned about the brakes. I have only driven it about 20 feet so far. If you pump the brakes repeatadly, they will get hard. This usually points to air in the brakes, at least to me. The master was full and pushed fluid up when I pressed down on the pedal. I don't have any time right now, but thought I'd take a chance that someone with experience with these might chime in. I bought it from a muffler shop, so it had mechanically inlined owner before. Other than that, and a disintegrated seat, I got it for a few hundred less than renting one for a week...so I'm pretty stoked. I thank anyone, in advance, that could lend their experience.
|
|
Sponsored Links | |
steve(ill)
Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 81257 |
Post Options
Thanks(0)
|
If you pump the brakes repeatadly, they will get hard. This usually points to air in the brakes, at least to me.
could be air... but if you pump it up and it gets hard, can you hold the pedal down and it stays hard, or does the pedal slowly sink to the floor ?? If it bleeds off, it normally means the master cylinder is leaking internal..
|
|
Like them all, but love the "B"s.
|
|
Coke-in-MN
Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41600 |
Post Options
Thanks(0)
|
If you see fluid pushed up into reservoir when pushing down pedal i chances are unit needs to be rebuilt as cups are bypassing fluid before closing vent holes . A small amount of movement should be noted when applying brake but more when letting off pressure
|
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
Lee Bradley
Bronze Level Joined: 13 Oct 2009 Location: Kingston, WA Points: 117 |
Post Options
Thanks(0)
|
I thought if you could pump up the brakes, they were out of adustment.
|
|
rw
Silver Level Joined: 28 Oct 2009 Location: United States Points: 383 |
Post Options
Thanks(0)
|
Brake adjustment needs to checked especially with the master cylinder full. The seller could have filled it and you may find it consumes some fluid with regular use. Most of all be safe. Hopefully the park/emergency brake is working.
|
|
pescadoman
Bronze Level Joined: 29 Sep 2023 Location: ventura Points: 28 |
Post Options
Thanks(0)
|
How do I check brake adjustment on this fork truck? I haven't checked to see if parking brake works. I bought it because, even delivered, it was hundreds cheaper than renting one....
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |