N-5 R-5 cylinder imput assembly

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Trying to remove the cylinder input assembly but dont have enough room do to the outer sheave hitting the clean grain elevator.     I have removed the nut and washer from input shaft
  I removed the bolts to the outer sheave ring
  I slid the assembly outward and removed 8  bolts from the back side of the inner sheave
  Everything is loose but I have no clearance to remove do to the outer sheave it's  hitting the clean grain elevator
 Do I have to drive both the inner and outer sheaves inward and leave them hanging on the input shaft while I take off the cylinder input spring assembly?
Thanks

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
nickia Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 11 Sep 2009 Location: alden iowa Points: 785	Post Options Post Reply Quote nickia Report Post Thanks(0) Quote Reply Topic: N-5 R-5 cylinder imput assembly Posted: 20 Sep 2023 at 5:27pm
	Trying to remove the cylinder input assembly but dont have enough room do to the outer sheave hitting the clean grain elevator. I have removed the nut and washer from input shaft I removed the bolts to the outer sheave ring I slid the assembly outward and removed 8 bolts from the back side of the inner sheave Everything is loose but I have no clearance to remove do to the outer sheave it's hitting the clean grain elevator Do I have to drive both the inner and outer sheaves inward and leave them hanging on the input shaft while I take off the cylinder input spring assembly? Thanks

Sponsored Links

SteveM C/IL Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Location: Shelbyville IL Points: 8235	Post Options Post Reply Quote SteveM C/IL Report Post Thanks(0) Quote Reply Posted: 21 Sep 2023 at 8:06am
	You might try a search over on thecombineforum.com