Farm Equipment - N-5 R-5 cylinder imput assembly

Print Page | Close Window

N-5 R-5 cylinder imput assembly

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197288
Printed Date: 25 Sep 2024 at 5:31am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: N-5 R-5 cylinder imput assembly

Posted By: nickia
Subject: N-5 R-5 cylinder imput assembly
Date Posted: 20 Sep 2023 at 5:27pm

Trying to remove the cylinder input assembly but dont have enough room do to the outer sheave hitting the clean grain elevator.

I have removed the nut and washer from input shaft

I removed the bolts to the outer sheave ring

I slid the assembly outward and removed 8 bolts from the back side of the inner sheave

Everything is loose but I have no clearance to remove do to the outer sheave it's hitting the clean grain elevator

Do I have to drive both the inner and outer sheaves inward and leave them hanging on the input shaft while I take off the cylinder input spring assembly?

Thanks

Replies:

Posted By: SteveM C/IL
Date Posted: 21 Sep 2023 at 8:06am

You might try a search over on thecombineforum.com