| Author |
 Topic Search  Topic Options
|
AC720Man 
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4637
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 2 bottom roll over plow
Posted: 21 Jul 2022 at 3:07pm |
|
Any suggestions on where to get plow parts for it? Mainly the shares. Needs a lot of work, came with my D17. Will get some pictures next week.
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
 |
|
Sponsored Links
|
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4409
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Jul 2022 at 5:58pm |
Are they "Bullet-Blade" or blacksmith (fitted) type shares? What bottom series do you have? I have some select parts left for the #124 bottoms on my plows and fewer for the #325. Without knowing what bottoms you have it's impossible to know what parts you need. Years ago I wholesaled most all of my plow parts to Dennis in southern IL.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
If you can't make it GO... make it SHINY
|
|
dr p
Orange Level
Joined: 24 Feb 2019
Location: new york
Points: 1011
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Jul 2022 at 7:56pm |
|
I got an extra owners manual I'd you need one
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4637
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Jul 2022 at 8:14pm |
|
A manual would be great and I have no idea what model I have. I need to pick it up next week as I have left it for 2 months at the previous owners place after I picked up the D17. Kinda forgot about it until recently. It’s not in the best shape and I guess that’s why I wasn’t so anxious to get it.
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
dr p
Orange Level
Joined: 24 Feb 2019
Location: new york
Points: 1011
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Jul 2022 at 6:00am |
|
Mine is a 53
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4409
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Jul 2022 at 6:08am |
|
The early model 50 rollover plows are a model 54; series 50, 4 bottoms. A 53 is a 50 series 3 bottom, a 52 is a 50 series 2 bottom, ect. There is a thread in the knowledge section describing how to identify plows.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
If you can't make it GO... make it SHINY
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4637
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Jul 2022 at 7:56am |
|
Thanks for the good info.
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
tadams(OH)
Orange Level Access
Joined: 17 Sep 2009
Location: Jeromesville, O
Points: 9638
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Jul 2022 at 2:18pm |
I have a 2 bottom roll over plow in Ohio if anyone is interested in buying please PM me.
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4637
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jul 2022 at 4:02pm |
|
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4637
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jul 2022 at 4:03pm |
|
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4637
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jul 2022 at 4:15pm |
|
I think everything can be freed up with some hard work. Not sure what I am going to do at this point. Either the scrapyard or maybe just a conversation piece. It was free so I really have nothing in it at this point. Early model so I’m sure plow parts are none existent.
Edited by AC720Man - 28 Jul 2022 at 4:16pm
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
ac45dave
Orange Level Access
Joined: 23 May 2015
Location: SE(IN)
Points: 1319
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jul 2022 at 4:23pm |
Get with Dave the plow man.He may have what ya need. http://www.davetheplowman.com/home.html
|
|
54 wd-45gas ; 56 wd-45d N/F w/fact p/s ; 63 d-17 sIII N/F gas ; 60 D14 N/F ; 67 d-17 sIV N/F gas ; 63D15 sII W/F; 39rc#667 ; 2021 massey 4710 fwa ; gravely 2 wheel tractors
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4637
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jul 2022 at 4:45pm |
|
Thanks Dave, I will get in touch with him.
Robbie
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4637
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jul 2022 at 5:18pm |
|
Appears to be a series 54
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4409
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jul 2022 at 7:47pm |
|
Yes: You have a #54 rollover plow. Just a guess at this point, you have #124 bottoms as That was a popular bottom series for eastern clay. Are the shin and moldboard cast pieces? As it has a separate shin, it can't be a #325. Remove a part and find a part number and the bottom series can be verified.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
If you can't make it GO... make it SHINY
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4637
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jul 2022 at 9:22pm |
|
When I get some spare time I will do that.
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
dr p
Orange Level
Joined: 24 Feb 2019
Location: new york
Points: 1011
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jul 2022 at 6:07am |
|
You are not scrapping that!
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4637
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jul 2022 at 6:59am |
|
Do you have suggestions DR P?
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
IBWD MIke
Orange Level
Joined: 08 Apr 2012
Location: Newton Ia.
Points: 3445
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jul 2022 at 8:15am |
 dr p wrote:
You are not scrapping that! |
X-2!!! That thing would be a gold mine at auction here in Iowa. This is why I don't have one. Always bring way more than I can justify for another plow.
|
|
plummerscarin
Orange Level Access
Joined: 22 Jun 2015
Location: ia
Points: 3126
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jul 2022 at 12:20pm |
|
Mike, you’re showing your hand. Looks like you need to work a deal
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4637
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jul 2022 at 4:07pm |
|
I will gladly trade for some of that gold!
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4637
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jul 2022 at 4:08pm |
|
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4637
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jul 2022 at 4:10pm |
|
Do you guys think this is 315499 or 488?
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4409
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jul 2022 at 6:51pm |
315498 shows up in the parts book as a short (9") landslide plate for a #124 bottom. Looks like my guess was correct. The #124 bottom is popular here in the east so you may be able to find other plows for the parts. The B&C plows used that bottom a lot around here. The LH parts are going to be the hard ones to find. I had to get 4 different B&C plows for the bottom parts to get cast moldboards on my #54 CA Rollover plow for my
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
If you can't make it GO... make it SHINY
|
|
IBWD MIke
Orange Level
Joined: 08 Apr 2012
Location: Newton Ia.
Points: 3445
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Jul 2022 at 7:15am |
plummerscarin wrote:
Mike, you’re showing your hand. Looks like you need to work a deal |
if I lived closer I'd go have a look for sure. Like Paul mentioned, those left hand wear parts are going to be an issue.
Friend of mine local to the area has a really nice 45 diesel with 54 that he plows with. It was up at Hutch, probably a picture in Lynn's pics somewhere.
|
|
dr p
Orange Level
Joined: 24 Feb 2019
Location: new york
Points: 1011
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Jul 2022 at 7:48pm |
|
There is a guy in Canada, ed Barrington (sp?) He has tons of obsolete plow parts. There is also a guy for bought the die works from balsters. Can't remember his name but it is some variation of " plow"
|
|
dr p
Orange Level
Joined: 24 Feb 2019
Location: new york
Points: 1011
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Jul 2022 at 8:04pm |
|
Ploworx
|
|
plummerscarin
Orange Level Access
Joined: 22 Jun 2015
Location: ia
Points: 3126
|
Post Options
Thanks(0)
Quote Reply
Posted: 31 Jul 2022 at 7:08am |
IBWD MIke wrote:
plummerscarin wrote:
Mike, you’re showing your hand. Looks like you need to work a deal |
if I lived closer I'd go have a look for sure. Like Paul mentioned, those left hand wear parts are going to be an issue.
Friend of mine local to the area has a really nice 45 diesel with 54 that he plows with. It was up at Hutch, probably a picture in Lynn's pics somewhere.
|
 This one?
Edited by plummerscarin - 31 Jul 2022 at 7:09am
|
|
IBWD MIke
Orange Level
Joined: 08 Apr 2012
Location: Newton Ia.
Points: 3445
|
Post Options
Thanks(0)
Quote Reply
Posted: 31 Jul 2022 at 7:17am |
|
That's the one! There is a pic of it in Lynn's 'First set', sixth from the bottom. I believe the LP D-19 in that set is his also. NF 180 is Luke R's.
|
|
plummerscarin
Orange Level Access
Joined: 22 Jun 2015
Location: ia
Points: 3126
|
Post Options
Thanks(0)
Quote Reply
Posted: 31 Jul 2022 at 8:55am |
|
He had it on the dyno also but I didn't hear the number
|
|
