2 bottom roll over plow

if you're missing the coulter mounts, I have new ones.

Missing a colter but would be cheaper than buying parts for mine.

Robbie what are the part numbers of plow parts your looking for.

Wow that is in really nice condition. Will be interesting to see what it brings. Remind me not to post pictures of mine anymore lol...

It’s going to take a lot of time to disassemble to clean up the parts to get it in working condition. No doubt it has been used a lot and probably set outside its entire life. If was a newer one the parts are less expensive and easier to obtain. My friend has the newer bullet shares, left and right but they will not work with the moldboards or frog that’s on it. I’m new to plow parts, my series 70 was in good shape when I got it. Dad’s Oliver as well. Not often we plow anymore other than gardens and an occasional field. Got a feeling I may tinker with it to make sure I can get it rotate freely and make sure it is salvageable.

Watched one sell for over four hundred Saturday. If I hadn't got a 60 series 2x16 SC bought earlier in the sale it would have gone higher.

Well, Ive got a decision to make. This roll over plow I admit intrigues me. Don’t see any in our area. It would only be used for gardens, plow days if one is close by, and display/conversation piece at local events. The shares are badly worn but usable. Probably wouldn’t cut the soil the best but they should be replaced IMO to have any chance at a quality performance. All 4 shins are broken. I can acquire 2 new left side shares but they are freakin expensive, $135 each. Short landslide is cheap at $20. Will find out tomorrow about right hand shares availability but don't see that as an issue. My question is, what’s a 2 bottom roll over plow worth in working condition and new shares? Trying to justify the cost.

He had it on the dyno also but I didn't hear the number

IBWD MIke wrote: plummerscarin wrote: Mike, you’re showing your hand. Looks like you need to work a deal if I lived closer I'd go have a look for sure. Like Paul mentioned, those left hand wear parts are going to be an issue. Friend of mine local to the area has a really nice 45 diesel with 54 that he plows with. It was up at Hutch, probably a picture in Lynn's pics somewhere.

This one?

Edited by plummerscarin - 31 Jul 2022 at 7:09am

There is a guy in Canada, ed Barrington (sp?) He has tons of obsolete plow parts. There is also a guy for bought the die works from balsters. Can't remember his name but it is some variation of " plow"

315498 shows up in the parts book as a short (9") landslide plate for a #124 bottom.

Mike, you’re showing your hand. Looks like you need to work a deal

Do you have suggestions DR P?

When I get some spare time I will do that.