| Author |
 Topic Search  Topic Options
|
MNLonnie 
Orange Level
Joined: 11 Sep 2009
Location: Baxter MN
Points: 4791
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: WF fenders??
Posted: 30 May 2010 at 7:22am |
|
Time to start on the WF and I need fenders. I've been told to get WC by some and WD by others. I compared fenders on my WD45, WC, RC, WF and Speed Patrol and the skins are all identical from what I can tell, just different brackets. Input appreciated.
|
|
Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker
|
 |
|
Sponsored Links
|
|
|
RichinWis
Orange Level
Joined: 11 Sep 2009
Location: Deforest Wis
Points: 691
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 May 2010 at 8:04am |
|
It's the backside reinforcement that is different, if you have the old ones from yours then you can use them, otherwise it get's challenging, if you look at the reinforcement you will see what I mean.
|
|
MNLonnie
Orange Level
Joined: 11 Sep 2009
Location: Baxter MN
Points: 4791
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 May 2010 at 8:32am |
|
I have the old ones. That reinforcing plate appears to be spot welded in?
|
|
Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker
|
|
RichinWis
Orange Level
Joined: 11 Sep 2009
Location: Deforest Wis
Points: 691
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 May 2010 at 2:21pm |
|
Well then Lonnie, that is most of the battle just get ahold of a nice set of WD WD45 fenders and remove the spot welds and replace with your old reinforcements, and whala WF fenders! I know easier said than done. HTH
|
|
MNLonnie
Orange Level
Joined: 11 Sep 2009
Location: Baxter MN
Points: 4791
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 May 2010 at 4:52pm |
|
You do make it sound easy. Thanks
|
|
Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker
|
|
Henry se/k!
Orange Level
Joined: 08 Mar 2010
Location: Kincaid Kansas
Points: 403
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 May 2010 at 6:07pm |
|
I filled the wd holes in and used 3/16 plate on back side for reinforcement. Thay will bolt to floor plate where it turns up at front. Looked good consering I had no old fenders
|
|
49 WF
Bronze Level
Joined: 07 Mar 2010
Location: sd
Points: 26
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 May 2010 at 9:50pm |
My WF fenders are different from my wd's and wc's. The small rib on the inside bottom is not on my WF fenders. It should not be to hard to cut out the rib and fill it smooth.
|
|
66 190 GAS,49WF,B,C,37WC,48WF,3WD'S, 66ALLCROP,B1,B10,sbchevy WC
|
|
