WF fenders??
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13142
Printed Date: 01 Feb 2025 at 6:02am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WF fenders??
Posted By: MNLonnie
Subject: WF fenders??
Date Posted: 30 May 2010 at 7:22am
Time to start on the WF and I need fenders. I've been told to get WC by some and WD by others. I compared fenders on my WD45, WC, RC, WF and Speed Patrol and the skins are all identical from what I can tell, just different brackets. Input appreciated.
-------------
Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker
|
Replies:
Posted By: RichinWis
Date Posted: 30 May 2010 at 8:04am
|
It's the backside reinforcement that is different, if you have the old ones from yours then you can use them, otherwise it get's challenging, if you look at the reinforcement you will see what I mean.
|
Posted By: MNLonnie
Date Posted: 30 May 2010 at 8:32am
I have the old ones. That reinforcing plate appears to be spot welded in?
-------------
Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker
|
Posted By: RichinWis
Date Posted: 30 May 2010 at 2:21pm
|
Well then Lonnie, that is most of the battle just get ahold of a nice set of WD WD45 fenders and remove the spot welds and replace with your old reinforcements, and whala WF fenders! I know easier said than done. HTH
|
Posted By: MNLonnie
Date Posted: 30 May 2010 at 4:52pm
You do make it sound easy. Thanks
-------------
Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker
|
Posted By: Henry se/k!
Date Posted: 30 May 2010 at 6:07pm
|
I filled the wd holes in and used 3/16 plate on back side for reinforcement. Thay will bolt to floor plate where it turns up at front. Looked good consering I had no old fenders
|
Posted By: 49 WF
Date Posted: 30 May 2010 at 9:50pm
|
My WF fenders are different from my wd's and wc's. The small rib on the inside bottom is not on my WF fenders. It should not be to hard to cut out the rib and fill it smooth.
-------------
66 190 GAS,49WF,B,C,37WC,48WF,3WD'S, 66ALLCROP,B1,B10,sbchevy WC
|
|