180 help

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Ok guys I'm looking for some help. I split my 180 at the torque housing and replaced the pto main shaft seals and reworked some broke pieces on the pto shifter lever. I put the tractor back together, but it won't pull now. It shifts thru the gears and barley moves when you release clutch. Is it possible I kinked the pickup lines on the clutch and it's not pulling fluid I checked level it's good. I even added more to make sure it was covering lines. Any help would be appreciated. I guess I'm going to have to re split it.  Just looking to you fellas with more experience than me this is my first time splitting one watched my dad do it but it's way different when you start.   The reason I replaced seals was the hyd. Fluid was transferring to the transmission compartment. This is working now as is the pto tractor just won't move and this wasn't a problem when I split it. Thanks in advance.    

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Fieldready Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 03 Apr 2012 Points: 6	Post Options Post Reply Quote Fieldready Report Post Thanks(0) Quote Reply Topic: 180 help Posted: 03 Apr 2012 at 7:55am
	Ok guys I'm looking for some help. I split my 180 at the torque housing and replaced the pto main shaft seals and reworked some broke pieces on the pto shifter lever. I put the tractor back together, but it won't pull now. It shifts thru the gears and barley moves when you release clutch. Is it possible I kinked the pickup lines on the clutch and it's not pulling fluid I checked level it's good. I even added more to make sure it was covering lines. Any help would be appreciated. I guess I'm going to have to re split it. Just looking to you fellas with more experience than me this is my first time splitting one watched my dad do it but it's way different when you start. The reason I replaced seals was the hyd. Fluid was transferring to the transmission compartment. This is working now as is the pto tractor just won't move and this wasn't a problem when I split it. Thanks in advance.

Sponsored Links