Farm Equipment - 180 help

Print Page | Close Window

180 help

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=48926
Printed Date: 27 Aug 2025 at 9:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 180 help

Posted By: Fieldready
Subject: 180 help
Date Posted: 03 Apr 2012 at 7:55am

Ok guys I'm looking for some help. I split my 180 at the torque housing and replaced the pto main shaft seals and reworked some broke pieces on the pto shifter lever. I put the tractor back together, but it won't pull now. It shifts thru the gears and barley moves when you release clutch. Is it possible I kinked the pickup lines on the clutch and it's not pulling fluid I checked level it's good. I even added more to make sure it was covering lines. Any help would be appreciated. I guess I'm going to have to re split it. Just looking to you fellas with more experience than me this is my first time splitting one watched my dad do it but it's way different when you start. The reason I replaced seals was the hyd. Fluid was transferring to the transmission compartment. This is working now as is the pto tractor just won't move and this wasn't a problem when I split it. Thanks in advance.