![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
WD WD45 SHIFT TOWERS. |
Post Reply ![]() |
Author | |
1946WP ![]() Orange Level ![]() ![]() Joined: 25 Apr 2010 Location: mn Points: 780 |
![]() ![]() ![]() ![]() ![]() Posted: 21 Feb 2012 at 9:19pm |
DOES ANYBODY KNOW IF THE WHOLE SHIFTER & TOWER CAN BE CHANGED BETWEEN A WD TRANSMISSION & WD45 TRANSMISSION OR VISE VERSA?
|
|
![]() |
|
Sponsored Links | |
![]() |
|
MACK ![]() Orange Level ![]() Joined: 17 Nov 2009 Points: 7664 |
![]() ![]() ![]() ![]() ![]() |
No, they are different. MACK
|
|
![]() |
|
Bill Long ![]() Orange Level ![]() Joined: 12 Sep 2009 Location: Bel Air, MD Points: 4556 |
![]() ![]() ![]() ![]() ![]() |
I have to agree with MACK. Remember the WD had straight gears while the very late WD's and the WD-45 had a constant mesh transmission. You shifted collars and not gears.
Good Luck!
Bill Long
|
|
![]() |
|
TedBuiskerN.IL. ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: Davis, IL. Points: 1959 |
![]() ![]() ![]() ![]() ![]() |
Won't it work if you change the forks to match the transmission?
|
|
Most problems can be solved with the proper application of high explosives.
|
|
![]() |
|
MACK ![]() Orange Level ![]() Joined: 17 Nov 2009 Points: 7664 |
![]() ![]() ![]() ![]() ![]() |
No
|
|
![]() |
|
1946WP ![]() Orange Level ![]() ![]() Joined: 25 Apr 2010 Location: mn Points: 780 |
![]() ![]() ![]() ![]() ![]() |
THANKS GUYS , I DIDN'T THINK SO BUT A FRIEND CALLED ME ,SAID HE INHERITED A WD THAT THE SHIFT TOWER WAS OFF & HE TRIED TO PUT IT BACK ON BUT COULDN'T GET TO WORK. FIGURED OUT AFTERWARDS IT WAS AN EARLIER WD BY SERIAL # & HE WAS TRYING TO PUT A BENT SHIFTER ON IT. TOLD I DIDN,T THINK IT WOULD WORK , BUT I'D ASK THE GUYS THAT KNOW.THANKS AGAIN.
|
|
![]() |
|
TedBuiskerN.IL. ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: Davis, IL. Points: 1959 |
![]() ![]() ![]() ![]() ![]() |
Mack, you're going to have to have a talk with my WD45 then.
I used a NOS WD shift tower with the innards from the WD45, and except for the springs being too long (so I used the shorter springs, It seems to work fine.
Edited by TedBuiskerN.IL. - 22 Feb 2012 at 9:43am |
|
Most problems can be solved with the proper application of high explosives.
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |