| Author |
 Topic Search  Topic Options
|
Italy Hill Produce 
Silver Level
Joined: 07 May 2010
Location: Upstate NY
Points: 141
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: G cultivator pins
Posted: 20 Feb 2011 at 8:57am |
|
Hey I need a set of the pins that hold the cultivator to the scissors lift (or whatever you call it) Can those be purchased new? Or is there someone that has a bunch in a pile in the barn somewhere that would part with two?
Thanks
Jonathan
|
|
G tractor and an All Crop 66
Also Kubota MX5100F and M9540HD12
|
 |
|
Sponsored Links
|
|
|
CTuckerNWIL
Orange Level
Joined: 11 Sep 2009
Location: NW Illinois
Points: 22823
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Feb 2011 at 9:07am |
I don't know if they are available new or repro but here is something that will work if you get the right size. http://www.shoplet.com/Jacobs-chuck-Morse-Taper-Ejecting-Drifts-30485/SEPTLS40330485/spdv There are several different size Morse taper ejecting drifts. The part number you want is the same as the CA front mount cultivator bracket uses if that is any help.
|
|
|
|
LannyMTN
Silver Level
Joined: 22 Aug 2010
Location: Middle TN
Points: 120
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Feb 2011 at 11:01am |
Can someone tell me if the wedge pins are the same on the CA cultivator, 80r mower, and G cultivator? If they are I can possibly find a pair.
Lanny Mid TN
|
|
JoeM(GA)
Orange Level
Joined: 12 Sep 2009
Location: Cumming,GA
Points: 4725
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Feb 2011 at 11:03am |
|
Lanny, I understand they are the same. I believe the Turners who help throw the G Roundup reproduce them
|
|
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB
|
|
Italy Hill Produce
Silver Level
Joined: 07 May 2010
Location: Upstate NY
Points: 141
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Feb 2011 at 11:37am |
|
Let me know.. They are the last pieces to the G cultivator puzzle I've been putting together...
|
|
G tractor and an All Crop 66
Also Kubota MX5100F and M9540HD12
|
|
Creek Jenkins
Orange Level
Joined: 14 Sep 2009
Location: Northern Minn
Points: 812
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Feb 2011 at 1:08pm |
I made a couple for my cultivator last year. I think it was Joe M GA sent me the measurements. Pretty easy to make and they work fine. Used 3/8" plate. Didn't get the little chain thingys made for them yet though.
I can send you a drawing if you want - can't seem to get a pdf to post and can't finger out how to convert it to a jpeg.
Cheers,
Creek
Edited by Creek Jenkins - 20 Feb 2011 at 1:08pm
|
|
Italy Hill Produce
Silver Level
Joined: 07 May 2010
Location: Upstate NY
Points: 141
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Feb 2011 at 5:16pm |
|
I already have two, on my other G, I just figured if I could buy two of them (they appear to be hardened) then I wouldn't spend a couple hours screwing around making them... Ie I'd rather spend the $20 for the correct part, then run to town, get some metal, and then spend 2-3 hours screwing around cutting and grinding etc.. Yes it should not take that long, but by the time I get the material, get to the shop, get the shop warmed up, make them, then get the shop cleaned up etc.. I just wasted half a day when I could have paid someone the $20 for the correct part...
|
|
G tractor and an All Crop 66
Also Kubota MX5100F and M9540HD12
|
|
LannyMTN
Silver Level
Joined: 22 Aug 2010
Location: Middle TN
Points: 120
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Feb 2011 at 3:30pm |
Jonathon,
I looked for those pins and wasn't able to find them. Sorry about any delay I may have caused. Lanny Mid TN
|
|
Creek Jenkins
Orange Level
Joined: 14 Sep 2009
Location: Northern Minn
Points: 812
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Feb 2011 at 5:06pm |
uploads/1014/Cultivator_Pin_A.pdf
See if this works - if you click on it it should take you to the drawing. I hope. Maybe.
|
|
