Farm Equipment - G cultivator pins

Print Page | Close Window

G cultivator pins

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=26001
Printed Date: 26 Feb 2025 at 12:34am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: G cultivator pins

Posted By: Italy Hill Produce
Subject: G cultivator pins
Date Posted: 20 Feb 2011 at 8:57am

Hey I need a set of the pins that hold the cultivator to the scissors lift (or whatever you call it) Can those be purchased new? Or is there someone that has a bunch in a pile in the barn somewhere that would part with two?
Thanks
Jonathan

-------------
G tractor and an All Crop 66
Also Kubota MX5100F and M9540HD12

Replies:

Posted By: CTuckerNWIL
Date Posted: 20 Feb 2011 at 9:07am

I don't know if they are available new or repro but here is something that will work if you get the right size. http://www.shoplet.com/Jacobs-chuck-Morse-Taper-Ejecting-Drifts-30485/SEPTLS40330485/spdv - http://www.shoplet.com/Jacobs-chuck-Morse-Taper-Ejecting-Drifts-30485/SEPTLS40330485/spdv There are several different size Morse taper ejecting drifts.
The part number you want is the same as the CA front mount cultivator bracket uses if that is any help.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: LannyMTN
Date Posted: 20 Feb 2011 at 11:01am

Can someone tell me if the wedge pins are the same on the CA cultivator, 80r mower, and G cultivator? If they are I can possibly find a pair.

Lanny Mid TN

Posted By: JoeM(GA)
Date Posted: 20 Feb 2011 at 11:03am

Lanny, I understand they are the same. I believe the Turners who help throw the G Roundup reproduce them

-------------
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB

Posted By: Italy Hill Produce
Date Posted: 20 Feb 2011 at 11:37am

Let me know.. They are the last pieces to the G cultivator puzzle I've been putting together...

-------------
G tractor and an All Crop 66
Also Kubota MX5100F and M9540HD12

Posted By: Creek Jenkins
Date Posted: 20 Feb 2011 at 1:08pm

I made a couple for my cultivator last year. I think it was Joe M GA sent me the measurements. Pretty easy to make and they work fine. Used 3/8" plate. Didn't get the little chain thingys made for them yet though.

I can send you a drawing if you want - can't seem to get a pdf to post and can't finger out how to convert it to a jpeg.

Cheers,

Creek

Posted By: Italy Hill Produce
Date Posted: 20 Feb 2011 at 5:16pm

I already have two, on my other G, I just figured if I could buy two of them (they appear to be hardened) then I wouldn't spend a couple hours screwing around making them... Ie I'd rather spend the $20 for the correct part, then run to town, get some metal, and then spend 2-3 hours screwing around cutting and grinding etc.. Yes it should not take that long, but by the time I get the material, get to the shop, get the shop warmed up, make them, then get the shop cleaned up etc.. I just wasted half a day when I could have paid someone the $20 for the correct part...

-------------
G tractor and an All Crop 66
Also Kubota MX5100F and M9540HD12

Posted By: LannyMTN
Date Posted: 21 Feb 2011 at 3:30pm

Jonathon,

I looked for those pins and wasn't able to find them. Sorry about any delay I may have caused. Lanny Mid TN

Posted By: Creek Jenkins
Date Posted: 21 Feb 2011 at 5:06pm

http://www.allischalmers.com/new/forum/uploads/1014/Cultivator_Pin_A.pdf - uploads/1014/Cultivator_Pin_A.pdf

See if this works - if you click on it it should take you to the drawing. I hope. Maybe.