| Author |
 Topic Search  Topic Options
|
AC720Man 
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4963
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: D14 steering seal
Posted: 24 Dec 2024 at 10:43pm |
|
Parts I need for my front support finally came in. The seal for the shaft retainer was a concern because it looked like a sweeper(felt)on top of a seal. The book only calls for 1 oil seal. As I described this to Brenda, she showed only 1 seal and it wasn’t nearly as thick as the original with no felt sweep built into it. Only seal available for it. Once the old one was driven out it is clear that it was all one seal and 2-3 times as thick as the new one. My concern is, this seal was driven down on a shoulder which made it flush with the retainer face. As it was designed. With the new one driven down on the shoulder it will be far below the retainer face. Should I order another seal and stack it on top of this one and drive it flush with the retainer face? My only other choice is to find a NOS seal from someone. Suggestions please
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
 |
|
Sponsored Links
|
|
|
Mikez
Orange Level Access
Joined: 16 Jan 2013
Location: Usa
Points: 8423
|
Post Options
Thanks(0)
Quote Reply
Posted: Yesterday at 12:29am |
|
Are you referring to 229967 seal
|
|
Gary(VA)
Silver Level
Joined: 13 Sep 2009
Location: Troutville, VA
Points: 336
|
Post Options
Thanks(0)
Quote Reply
Posted: Yesterday at 5:31am |
Good Morning Robbie and Merry Christmas I can’t speak to the seal for the steering but I remember the same issue on the rear pto seal on a D14 or 17 and ended up doubling the seals and worked fine.
|
|
Tom IA
Silver Level
Joined: 17 Sep 2009
Location: Donahue IA
Points: 255
|
Post Options
Thanks(0)
Quote Reply
Posted: Yesterday at 7:49am |
|
I always double up on the replacement seal have done 15 17 19 no problems
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 22681
|
Post Options
Thanks(0)
Quote Reply
Posted: Yesterday at 8:40am |
Ii did the double seal trick for one rear axle... ..wished I'd both back then....sigh
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4963
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 hours 38 minutes ago at 6:20pm |
|
Yes Mike, with 70 in front of it on the AGCO site.
I will see if anyone has a NOS first in the next few days, if not I will double seal it. Thanks everyone for responding.
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
