D10 Hydraulic Problems

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hey all,
      I have a D10 that I’ve had for around 10 years.  The hydraulics always worked ok. Well they went up and down when told to and held position just fine. Traction booster never worked. 
Well now the lift wants too raise any time the tractor is running. It is a series 2 with live hydraulics. The control valve feels funny now, not wanting to click into position.  Also the traction booster valve that rides on the 3 point has always just been tied on to the tractor with wires. It is still hooked up to the control handle but the whole valve just goes up and down with the control handle.  It does not ride on the 3 point linkage like I think it should.  I don’t really know how that valve is supposed to be mounted. I don’t see a way to keep it on the 3 point linkage, but I’ve never seen another series 2 to see how it is supposed to be mounted.   I don’t know if that valve is part of the problem or not. 
Does the main valve give many problems? And is it rebuildable? Does it have o-rings in it that could have went bad? 
Anyway the main problem is that the 3 point arms will constantly raise slowly and not go down anymore. 
Anyone seen this before? Or any suggestions on what I should look for to fix this problem?
Also if anyone has a picture of how the boost valve is supposed to be attached I’d appreciate seeing how it hooks up. 
Thanks for any help with this issue. 

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
DaveSB Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 04 Aug 2012 Location: mocksville, nc Points: 239	Post Options Post Reply Quote DaveSB Report Post Thanks(0) Quote Reply Topic: D10 Hydraulic Problems Posted: 3 hours 57 minutes ago at 4:17pm
	Hey all, I have a D10 that I’ve had for around 10 years. The hydraulics always worked ok. Well they went up and down when told to and held position just fine. Traction booster never worked. Well now the lift wants too raise any time the tractor is running. It is a series 2 with live hydraulics. The control valve feels funny now, not wanting to click into position. Also the traction booster valve that rides on the 3 point has always just been tied on to the tractor with wires. It is still hooked up to the control handle but the whole valve just goes up and down with the control handle. It does not ride on the 3 point linkage like I think it should. I don’t really know how that valve is supposed to be mounted. I don’t see a way to keep it on the 3 point linkage, but I’ve never seen another series 2 to see how it is supposed to be mounted. I don’t know if that valve is part of the problem or not. Does the main valve give many problems? And is it rebuildable? Does it have o-rings in it that could have went bad? Anyway the main problem is that the 3 point arms will constantly raise slowly and not go down anymore. Anyone seen this before? Or any suggestions on what I should look for to fix this problem? Also if anyone has a picture of how the boost valve is supposed to be attached I’d appreciate seeing how it hooks up. Thanks for any help with this issue.
	1948 C, 1953 CA, 1948 WD, 1961 D-17 Series 2 Diesel, 1939 WC, 1957 D14

Sponsored Links

Eric B Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 09 Feb 2012 Location: British Columbi Points: 930	Post Options Post Reply Quote Eric B Report Post Thanks(0) Quote Reply Posted: 2 hours 12 minutes ago at 6:02pm
	We had much the same issue with my Dad's D10. When I checked it out it was the round rod in the linkage mechanism that had slipped slightly. It has that little 'lock screw' to hold it in place. I would check that first as it may not be more serious than that.
	Currently- WD,WC,3WF's,2 D14's B. Previously- I 600,TL745,200,FL9,FR12,H3,816 LBH. Earth has no sorrow that Heaven cannot heal!

DaveSB Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 04 Aug 2012 Location: mocksville, nc Points: 239	Post Options Post Reply Quote DaveSB Report Post Thanks(0) Quote Reply Posted: 1 hour 50 minutes ago at 6:24pm
	Thanks for responding, is this lock screw in the main valve? I will look tomorrow. Thanks
	1948 C, 1953 CA, 1948 WD, 1961 D-17 Series 2 Diesel, 1939 WC, 1957 D14