G Rear Furrowing Bar

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Well, I finally got most of a rear furrowing bar. No, it's not complete and I gave to much for it but it's mine. (And the UPS man hates me !) Both tool bars are missing but I can bend steel, so no problem. The lift lever has been shortened, considerably ! Barely a foot above the Ratchet. Still, not a big  problem. Both right and left Plungers and the plunger block are missing. This is a problem ! Here's where the pix come in ! Are they the same as the front lift Ratchet and Block ? If so, I have the real thing to look at and should be able to duplicate. If they are different somehow, I'd appreciate a picture or two if anyone wouldn't mind. Thanks.

Oh, I also got two front drawbars, one factory original and one homemade. There really wasn't anything about a G that was 'light duty' was there ? The steel in this stuff is massive !

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Warren(Oh) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 11 Sep 2009 Location: Jackson, Ohio Points: 1127	Post Options Post Reply Quote Warren(Oh) Report Post Thanks(0) Quote Reply Topic: G Rear Furrowing Bar Posted: 21 Dec 2010 at 7:24pm
	Well, I finally got most of a rear furrowing bar. No, it's not complete and I gave to much for it but it's mine. (And the UPS man hates me !) Both tool bars are missing but I can bend steel, so no problem. The lift lever has been shortened, considerably ! Barely a foot above the Ratchet. Still, not a big problem. Both right and left Plungers and the plunger block are missing. This is a problem ! Here's where the pix come in ! Are they the same as the front lift Ratchet and Block ? If so, I have the real thing to look at and should be able to duplicate. If they are different somehow, I'd appreciate a picture or two if anyone wouldn't mind. Thanks. Oh, I also got two front drawbars, one factory original and one homemade. There really wasn't anything about a G that was 'light duty' was there ? The steel in this stuff is massive !

Sponsored Links

Scott(GA) Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 13 Sep 2009 Location: PeachtreeCityGA Points: 407	Post Options Post Reply Quote Scott(GA) Report Post Thanks(0) Quote Reply Posted: 22 Dec 2010 at 9:17pm
	RH Master Lift Parts: Spring, Plunger Part# LTP-31 (same used for both plungers) Plunger, Spring Box, Right Part# LX-652 Plunger, Spring Box, Left Part# LX-653 Block, Plunger Raising Part# 303262 Guide, Plunger, Upper Part# 308300 Bolt, Guide Part#308274 Rear Furrowing Bar Spring, Plunger Part# LTP-31 Plunger, Spring Box, R.H. Part# LX-652 Plunger, Spring Box, L.H. Part# LX-653 Block, Raising Part# 303262 Guide, Plunger, Upper Part# 308300 Bolt, Guide Part# 308274 Looks like all the part numbers match. Best regards, Scott

Warren(Oh) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 11 Sep 2009 Location: Jackson, Ohio Points: 1127	Post Options Post Reply Quote Warren(Oh) Report Post Thanks(0) Quote Reply Posted: 23 Dec 2010 at 7:36am
	Thanks, Scott, good to know all the parts interchange. I just pulled the plungers from my G front lift. Any chance someone has a set they'd sell ? I doubt I can make them myself !