Farm Equipment - G Rear Furrowing Bar

Print Page | Close Window

G Rear Furrowing Bar

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=22677
Printed Date: 13 Feb 2025 at 2:08pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: G Rear Furrowing Bar

Posted By: Warren(Oh)
Subject: G Rear Furrowing Bar
Date Posted: 21 Dec 2010 at 7:24pm

Well, I finally got most of a rear furrowing bar. No, it's not complete and I gave to much for it but it's mine. (And the UPS man hates me !) Both tool bars are missing but I can bend steel, so no problem. The lift lever has been shortened, considerably ! Barely a foot above the Ratchet. Still, not a big problem. Both right and left Plungers and the plunger block are missing. This is a problem ! Here's where the pix come in ! Are they the same as the front lift Ratchet and Block ? If so, I have the real thing to look at and should be able to duplicate. If they are different somehow, I'd appreciate a picture or two if anyone wouldn't mind. Thanks.

Oh, I also got two front drawbars, one factory original and one homemade. There really wasn't anything about a G that was 'light duty' was there ? The steel in this stuff is massive !

Replies:

Posted By: Scott(GA)
Date Posted: 22 Dec 2010 at 9:17pm

RH Master Lift Parts:

Spring, Plunger Part# LTP-31 (same used for both plungers)

Plunger, Spring Box, Right Part# LX-652
Plunger, Spring Box, Left Part# LX-653

Block, Plunger Raising Part# 303262

Guide, Plunger, Upper Part# 308300
Bolt, Guide Part#308274

Rear Furrowing Bar

Spring, Plunger Part# LTP-31
Plunger, Spring Box, R.H. Part# LX-652

Plunger, Spring Box, L.H. Part# LX-653

Block, Raising Part# 303262

Guide, Plunger, Upper Part# 308300

Bolt, Guide Part# 308274

Looks like all the part numbers match.

Best regards,

Scott

Posted By: Warren(Oh)
Date Posted: 23 Dec 2010 at 7:36am

Thanks, Scott, good to know all the parts interchange. I just pulled the plungers from my G front lift. Any chance someone has a set they'd sell ? I doubt I can make them myself !