| Author |
 Topic Search  Topic Options
|
rw 
Silver Level
Joined: 28 Oct 2009
Location: United States
Points: 383
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 190xt brakes
Posted: 26 Nov 2023 at 5:18pm |
|
The adjuster bolts (3/4 hex) on my XT cant be tightened like they are bottomed out. What needs to be done to lessen the free travel on the pedals?
|
 |
|
Sponsored Links
|
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4910
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Nov 2023 at 9:45pm |
|
Sounds like the pads are bottomed out? Have you removed the cover to inspect them? Wear a mask, nasty stuff in there. I replaced mine several years ago due to that issue. Cleaned the balls and ramps also. I have great brakes now. They are external!!! So much easier to work on.
Edited by AC720Man - 26 Nov 2023 at 9:47pm
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
rw
Silver Level
Joined: 28 Oct 2009
Location: United States
Points: 383
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Nov 2023 at 11:14am |
|
OK, should I plan to replace the disks shaped lining and the bands at the same time?
|
|
Lynn Marshall
Orange Level Access
Joined: 13 Sep 2009
Location: Dana, Iowa
Points: 2282
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Nov 2023 at 12:25pm |
|
You can shorten the brake rods at the front if you want, but your brake linings are probably about shot and you don't want to have a metal to metal situation. $$$$$$.
|
|
rw
Silver Level
Joined: 28 Oct 2009
Location: United States
Points: 383
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Nov 2023 at 12:30pm |
|
Thanks for the input. Ill get it torn down and looked over. I'll put it back together best I can so it will stop good for as long time as possible.
|
|
Rick
Orange Level
Joined: 11 Sep 2009
Location: Jonesburg,Mo.
Points: 3651
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Nov 2023 at 12:32pm |
|
RW...I sent you a message thru the forum here...Rick
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7332
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Nov 2023 at 2:50pm |
 rw wrote:
OK, should I plan to replace the disks shaped lining and the bands at the same time? |
You will not know for sure until you open things up and take a look.
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
