This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Allis 180 Turbo |
Post Reply |
Author | |
wd45tim
Bronze Level Joined: 28 May 2014 Location: Indiana Points: 10 |
Post Options
Thanks(0)
Posted: 26 Jun 2023 at 8:03pm |
Can you install a 190 turbo on a 180 diesel for 5 mph pulling at 20% over stock rpms without hurting the motor? Approximately how much hp can you get safely?
|
|
Sponsored Links | |
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20523 |
Post Options
Thanks(0)
|
If your 180 injection pump is set for 64 HP output with 2200 RPM top speed, I doubt that a 190 XT turbo addition would gain much of anything. Maybe a couple of HP but nothing spectacular. The 190 engine is set for more fuel delivery for 77 HP and 2400 RPM. A 190XT has even more fuel delivery with the turbo and makes 94 HP easily. Yes you can add the XT turbo but you need more fuel to make things happen. A 180 also has smaller injectors than a 190 or 190XT.
|
|
injpumpEd
Orange Level Access Joined: 13 Sep 2009 Location: Walnut IL Points: 4916 |
Post Options
Thanks(0)
|
As mentioned, the nozzles in a 180/185/190 are smaller than a 190XT/200, all the way up to the 7060. Add the turbo, but it won't gain much hp until it's fed more fuel. The 180/185 are set so low on fuel delivery too.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
DMiller
Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 31095 |
Post Options
Thanks(0)
|
Seems everyone I know working to raise HP on a diesel automatically think Turbo, Turbochargers were developed as 'Altitude Compensation" originally, nothing more in general. As engines Uprated they became air boost supercharger devices HOWEVER, as noted requires MORE fuel to get the devices to 'Spool Up' where if get too much fuel all you will do is wash cylinder walls down and smoke a piston or pistons. We built IH Diesel series Pullers in the 1980s, had to O-Ring the Blocks to heads once got to the magic More Fuel and Boost as the head gaskets were NOT intended for the pressures presented, figure on that as your next dilemma once add all the above.
|
|
DanWi
Orange Level Access Joined: 18 Sep 2009 Location: wttn Points: 1781 |
Post Options
Thanks(0)
|
The 301 was up to 130hp in combines so the motor should be good to that point just a matter of pump, injectors and turbo to get you there.
|
|
DMiller
Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 31095 |
Post Options
Thanks(0)
|
Have to consider valve train and timing of cam beyond pump timing, then the pistons whether or not been decompressed to handle the heavier fuel load and firing shock load. Not all is basic stock with just more fuel.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |