| Author |
 Topic Search  Topic Options
|
brouillettefarms 
Silver Level
Joined: 30 Jan 2013
Location: Vincennes
Points: 318
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: WTB 190 belt pulley
Posted: 09 Dec 2022 at 8:35am |
|
Looking to buy a flat belt pulley for a 190 any help would be appreciated.
Thanks,
Ben
812-881-7654
|
 |
|
Sponsored Links
|
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7332
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Dec 2022 at 11:13am |
|
The pulley itself is the same as other D series tractors but the drive assembly is not.
Good luck finding one, they are near impossible to find. You would also need the engaging mechanism that goes in the torque tube. Not all tractors have it.
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
JoeO(CMO)
Orange Level
Joined: 11 Sep 2009
Location: Cent Missouri
Points: 2694
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Dec 2022 at 1:50pm |
|
Would one for a 180-185 work as well?
|
|
brouillettefarms
Silver Level
Joined: 30 Jan 2013
Location: Vincennes
Points: 318
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Dec 2022 at 1:56pm |
|
I believe so, it should have the 11" body
|
|
Calvin Schmidt
Orange Level
Joined: 11 Sep 2009
Location: Ontario Can.
Points: 4525
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 Dec 2022 at 9:05am |
|
180-185 has the same torque tube as a OneNinety. Need the internal parts to be functional. Have a belt pulley on my OneNinety.
|
|
Nothing is impossible if it is properly financed
|
|
Adam Stratton
Orange Level Access
Joined: 11 Sep 2009
Location: SW MO
Points: 1363
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 Dec 2022 at 8:44pm |
|
Won't a d-series pulley bolt up and function? I don't know if there is some difference in what is correct or not depending if you are going for show or function but I sure think I remember borrowing the assembly from a d14 to put on a 190 gas once and if I'm not mistaken it worked just fine
|
|
Calvin Schmidt
Orange Level
Joined: 11 Sep 2009
Location: Ontario Can.
Points: 4525
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Dec 2022 at 6:55am |
The pulley casting on the D series is 4" shorter. It will work on a OneNinety if the tractor has the internal gear etc. The belt may rub along the side rails.
|
|
Nothing is impossible if it is properly financed
|
|
JC-WI
Orange Level Access
Joined: 11 Sep 2009
Location: wisconsin
Points: 33823
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Dec 2022 at 12:05am |
From the Dealers Parts books of the D19 and the 1964 190; the shaft and the housing and mount bolts were the only parts different. bearings, seal, shims, gear, shaft nut and pully were the same. D19 - shaft - part number 230235 housing- 228595 capscrews 920583 190 - shaft- 243033 housing- 243032 capscrews 923494
Allis provided a drive for the air conditioner pump for their cabbed tractors from the belt pully drive at one time.
and
there was an adapter to put in the belt pully hole to drive hydraulic
pumps too, where some application required more quantity of oil than
what the tractor's pump could deliver. Hope that info helps.
|
|
He who says there is no evil has already deceived himself
The truth is the truth, sugar coated or not. Trawler II says, "Remember that."
|
|
