Classifieds - WTB 190 belt pulley

Print Page | Close Window

WTB 190 belt pulley

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=192282
Printed Date: 14 Nov 2024 at 11:10pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WTB 190 belt pulley

Posted By: brouillettefarms
Subject: WTB 190 belt pulley
Date Posted: 09 Dec 2022 at 8:35am

Looking to buy a flat belt pulley for a 190 any help would be appreciated.
Thanks,
Ben
812-881-7654

Replies:

Posted By: DSeries4
Date Posted: 09 Dec 2022 at 11:13am

The pulley itself is the same as other D series tractors but the drive assembly is not.
Good luck finding one, they are near impossible to find. You would also need the engaging mechanism that goes in the torque tube. Not all tractors have it.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080

Posted By: JoeO(CMO)
Date Posted: 09 Dec 2022 at 1:50pm

Would one for a 180-185 work as well?

Posted By: brouillettefarms
Date Posted: 09 Dec 2022 at 1:56pm

I believe so, it should have the 11" body

Posted By: Calvin Schmidt
Date Posted: 11 Dec 2022 at 9:05am

180-185 has the same torque tube as a OneNinety. Need the internal parts to be functional. Have a belt pulley on my OneNinety.

-------------
Nothing is impossible if it is properly financed

Posted By: Adam Stratton
Date Posted: 11 Dec 2022 at 8:44pm

Won't a d-series pulley bolt up and function? I don't know if there is some difference in what is correct or not depending if you are going for show or function but I sure think I remember borrowing the assembly from a d14 to put on a 190 gas once and if I'm not mistaken it worked just fine

Posted By: Calvin Schmidt
Date Posted: 12 Dec 2022 at 6:55am

The pulley casting on the D series is 4" shorter. It will work on a OneNinety if the tractor has the internal gear etc. The belt may rub along the side rails.

-------------
Nothing is impossible if it is properly financed

Posted By: JC-WI
Date Posted: 13 Dec 2022 at 12:05am

From the Dealers Parts books of the D19 and the 1964 190; the shaft and the housing and mount bolts were the only parts different. bearings, seal, shims, gear, shaft nut and pully were the same.

D19 - shaft - part number 230235 housing- 228595 capscrews 920583

190 - shaft- 243033 housing- 243032 capscrews 923494

Allis provided a drive for the air conditioner pump for their cabbed tractors from the belt pully drive at one time.

and there was an adapter to put in the belt pully hole to drive hydraulic pumps too, where some application required more quantity of oil than what the tractor's pump could deliver.

Hope that info helps.

-------------
He who says there is no evil has already deceived himself
The truth is the truth, sugar coated or not. Trawler II says, "Remember that."