| Author |
 Topic Search  Topic Options
|
blue924.9 
Orange Level
Joined: 22 Mar 2013
Location: George Iowa
Points: 1086
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Recommend a tractor
Posted: 28 Mar 2020 at 10:30pm |
|
Looking to setup a new puller. Looking for an open class tractor with these rules
Model must have starting production in 1960 or older
OPEN:
ENGINE BLOCK AND CRANKCASE MUST BE SAME LENGTH, HEIGHT, NUMBER OF CYLINDERS, FUEL TYPE AND MAKE AS STOCK
30% OVER RPM
8 MPH MAX, ANY GEAR
WHEELIE BARS REQUIRED, SIDE SHIELDS & SCATTER BLANKET RECOMMENDED
18.4 X 38 MAX – ANY CUT, NO DUALS OR RADIALS
20 IN HIGH & 18 IN MIN DRAWBAR
Would prefer a diesel but if parts are scarce or modifications are limited gas works as well.
NOT NECESSARILY LOOKING FOR ENOUGH POWER TO RUN 8MPH. Right now running stock class 2.5 mph and wasnt to step it up a bit
|
|
hi my names dan, I am a young guy. i have a problem, i prefer my tractors orange and my clutches mechanical, thanks for letting me share
|
 |
|
Sponsored Links
|
|
|
Robacpuller
Silver Level
Joined: 07 Apr 2016
Location: Wisconsin
Points: 248
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Mar 2020 at 10:45pm |
|
What kind of tractor do uhave
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20536
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Mar 2020 at 11:48pm |
|
Diesel engine will never make as much HP as a gas engine unless it is turbocharged, which you cannot do. What is the maximum weight you can haul on your trailer/truck ??
|
|
AaronSEIA
Orange Level
Joined: 11 Sep 2009
Location: Mt Pleasant, IA
Points: 2551
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Mar 2020 at 7:09am |
What is the class weight? AaronSEIA
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20536
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Mar 2020 at 7:39am |
|
If you want to pull an A-C, the newest and largest is a D-17. A D-15 fits the 1960 criteria, but would be a very poor choice. Other than that, the usual WC, WD, WD45, B - C, CA and maybe a UC.
|
|
blue924.9
Orange Level
Joined: 22 Mar 2013
Location: George Iowa
Points: 1086
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Mar 2020 at 3:39pm |
|
How many cubic inches can the d17 engine be built up to. Ive got a pretty mild 240 in my wd that's competitive in the stock class but want to build an open class tractor
|
|
hi my names dan, I am a young guy. i have a problem, i prefer my tractors orange and my clutches mechanical, thanks for letting me share
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4753
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Mar 2020 at 3:39pm |
|
As Aaron asked What weight class are you looking at? 2500/3000=CA 3000/3500 =WC 4000/6000 =D17
Edited by PaulB - 29 Mar 2020 at 3:40pm
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20536
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Mar 2020 at 4:17pm |
|
D-17 can pull 4250. I regularly pull 4500 and up.
Bare weight of mine with 14.9 x 38's is 3800 lbs.
Edited by DrAllis - 29 Mar 2020 at 4:28pm
|
|
Robacpuller
Silver Level
Joined: 07 Apr 2016
Location: Wisconsin
Points: 248
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Mar 2020 at 8:37pm |
|
U can go over 400 cubes, but the rod ratio gets alittle far out for running 3000 rpms. Stay around 300 and do a lot of air flow work,cam, cam timing,carb work. Get ur head flowing but not to big on valve size. Get manifold flowing good or a header. $$$$$$$ makes hp
|
|
AaronSEIA
Orange Level
Joined: 11 Sep 2009
Location: Mt Pleasant, IA
Points: 2551
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Mar 2020 at 6:12am |
At 30% over RPM limit, the best he could do is about 2400 rpm anyway. I've heard of 400 being common. Antique tractor pullers may well be like fishermen though. Sometimes they use a different tape when they are measuring... AaronSEIA
|
|
Robacpuller
Silver Level
Joined: 07 Apr 2016
Location: Wisconsin
Points: 248
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Mar 2020 at 9:08pm |
|
3000 rpm is easy to make, I do not run mine that high. But the guys that run open usually don't run a govener. WI50 use to run his WC up to 6000 rpm, he ran around 290 cubes.
|
|
d17brown
Orange Level
Joined: 11 Sep 2009
Location: farley iowa
Points: 1689
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Apr 2020 at 7:41pm |
|
I had a D17 stretched to 435 cubes
|
|
phil
|
|
RichinIL
Bronze Level
Joined: 21 Mar 2010
Points: 22
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Apr 2020 at 5:29pm |
|
My 17 weighs 3640 no driver with 15.5 38s. What bore and stroke are you using to get 435 ci?
|
|
bradley6874
Orange Level
Joined: 05 Sep 2010
Location: salisbury md
Points: 1344
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Apr 2020 at 7:57pm |
|
4.7 bore stroke 6.25 strok = 433
|
|
You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul
|
|
Robacpuller
Silver Level
Joined: 07 Apr 2016
Location: Wisconsin
Points: 248
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Apr 2020 at 9:33pm |
|
Must b filling the block, sleaves would b very thin. Custom rods!
|
|
