![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
2 tranny question??? |
Post Reply ![]() |
Author | |
MNLonnie ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: Baxter MN Points: 4791 |
![]() ![]() ![]() ![]() ![]() Posted: 12 Sep 2010 at 9:37pm |
http://cgi.ebay.com/Allis-Chalmers-WC-tractor-2-trannys-buddy-seat-newtires-/220668703639?pt=LH_DefaultDomain_0&hash=item3360e13397
This tractor is claimed to go over 40 MPH because of the 2 tranny set up. I understand an overdrive for a small increase but how does 2 trannys change your top end, isn't 4th or high gear 1:1 ratio?
|
|
Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker
|
|
![]() |
|
Sponsored Links | |
![]() |
|
Roddo ![]() Orange Level ![]() Joined: 16 Jul 2010 Location: Brant, Ontario Points: 466 |
![]() ![]() ![]() ![]() ![]() |
Maybe the 2nd one is in backwards?
|
|
![]() |
|
Rfdeere ![]() Orange Level ![]() Joined: 11 Sep 2009 Location: Idaville, IN Points: 3283 |
![]() ![]() ![]() ![]() ![]() |
The second tranny He says has special high end gears. It (the second transmission) Does not appear to be a wc or wd Trans..
|
|
Randy Freshour,Member Indiana AC Partners,
http://www.rumelyallis.com |
|
![]() |
|
Ken(MI) ![]() Orange Level ![]() ![]() Joined: 14 Sep 2009 Location: Lansing, MI Points: 619 |
![]() ![]() ![]() ![]() ![]() |
The second tranny is a WC gearbox, installed backwards, obvious because of the clearance hump in the side of the tranny for the reverse shifter fork, on the front gearbox, the hump is on the left, and on the rear box, it's on the right.
|
|
![]() |
|
MNLonnie ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: Baxter MN Points: 4791 |
![]() ![]() ![]() ![]() ![]() |
OK, I see how having one backwards would do it. Thanks
|
|
Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker
|
|
![]() |
|
scott ![]() Orange Level Access ![]() Joined: 12 Sep 2009 Location: michigan Points: 2642 |
![]() ![]() ![]() ![]() ![]() |
Could the uninformed assume the WC tranny is about a foot or so long? Bolt together stuff shows some real creativity. How many adapters are likely used here?
|
|
![]() |
|
CJohnS MI ![]() Orange Level ![]() Joined: 27 Jun 2010 Location: Lapeer MI Points: 326 |
![]() ![]() ![]() ![]() ![]() |
I have no clue, but if the second trans was installed backwards, then hows come I can read the shift legend? |
|
![]() |
|
CTuckerNWIL ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: NW Illinois Points: 22823 |
![]() ![]() ![]() ![]() ![]() |
The sheet metal doesn't seem right for a 35. LOL
|
|
http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
|
![]() |
|
CJohnS MI ![]() Orange Level ![]() Joined: 27 Jun 2010 Location: Lapeer MI Points: 326 |
![]() ![]() ![]() ![]() ![]() |
The more I think about it, the more inclined I am to say Ford AA trans.
That is the same setup my dad used to build his homemade tractor back in the fifties. Two of those trannies, a narrowed worm rearend, and wisconsin 2-cyl. |
|
![]() |
|
Ken(MI) ![]() Orange Level ![]() ![]() Joined: 14 Sep 2009 Location: Lansing, MI Points: 619 |
![]() ![]() ![]() ![]() ![]() |
Blow the picture up and it shows that the shift pattern was put on there with magic marker, the other clue is the casting number in the shift tower (1219) which is on the front side of a WC gearbox
|
|
![]() |
|
Brian G. NY ![]() Orange Level ![]() ![]() Joined: 12 Sep 2009 Location: 12194 Points: 2244 |
![]() ![]() ![]() ![]() ![]() |
I wouldn't want to be puttin' too much load on that tractor with the first tranny in low or 2nd.; might blow the second tranny to smithereens? They definitely were not designed for that much torque input!
|
|
![]() |
|
CJohnS MI ![]() Orange Level ![]() Joined: 27 Jun 2010 Location: Lapeer MI Points: 326 |
![]() ![]() ![]() ![]() ![]() |
OK, I get it Ken, you're saying that the second is a WC too - just flipped around...
duh, I see the "other" shift legend hiding behind the shifter tower. Very clever, those Japaneses... |
|
![]() |
|
DSeries4 ![]() Orange Level ![]() ![]() Joined: 12 Sep 2009 Location: Ontario, Canada Points: 7379 |
![]() ![]() ![]() ![]() ![]() |
Has hand brakes AND foot brakes???
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |