| Author |
 Topic Search  Topic Options
|
Ed (Ont) 
Orange Level
Joined: 08 Nov 2009
Location: New Lowell, Ont
Points: 1361
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Wd45 brakes
Posted: 29 Jan 2017 at 7:19pm |
Started on my brakes. Going well - pin came out easy. Have planetary off the rt side and brake apart. Wheel seals leaking on both sides so I'll have to get those. Now to the fun stuff. Bad bearing and race at rt side carrier - didn't want to see that. Do I have to take diff out to remove that bearing?? I haven't taken the left apart yet. Have drained diff as well. Does that drain diff and trans or just diff. Lot of fluid in there. Thanks. 
Edited by Ed (Ont) - 29 Jan 2017 at 7:41pm
|
 |
|
Sponsored Links
|
|
|
norm[ind]
Orange Level
Joined: 29 Oct 2010
Location: bourbon,ind
Points: 2992
|
Post Options
Thanks(1)
Quote Reply
Posted: 29 Jan 2017 at 7:54pm |
|
good luck with the brake repair
|
|
SteveM C/IL
Orange Level Access
Joined: 12 Sep 2009
Location: Shelbyville IL
Points: 8367
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jan 2017 at 9:08pm |
|
think there are a couple drain plugs under there and to get the brg off carrier it would be much easier to remove carrier.No problem once axle hsg's are off.I would just use existing shims on each side(keep in order) and call brg fit close enough.
|
|
Don(MO)
Orange Level
Joined: 12 Sep 2009
Location: Bates City MO.
Points: 6862
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jan 2017 at 9:29pm |
|
|
|
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
|
Ed (Ont)
Orange Level
Joined: 08 Nov 2009
Location: New Lowell, Ont
Points: 1361
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jan 2017 at 11:33pm |
|
Thx for the replies. Will continue in the morning. I'll phone local dealer and get some more parts. Don I like your stand. Makes it easier and safer. I"ll let you know how I make out. Ed.
|
|
Ed (Ont)
Orange Level
Joined: 08 Nov 2009
Location: New Lowell, Ont
Points: 1361
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Jan 2017 at 8:47pm |
|
Well today didn't go as well. Tried for a couple hr to get left pin out but no luck. So decided to cut it out. 3 cuts to get it all but actually not a bad way to do it. Could have saved some time if I had done that right away. So diff is on the ground - both side bearings bad. Rest looks like brand new. Wonder if the oil does not get to sides well or why these bearings failed? It was original diff fluid in it but didn't look too bad.
|
|
MACK
Orange Level
Joined: 17 Nov 2009
Points: 7664
|
Post Options
Thanks(1)
Quote Reply
Posted: 30 Jan 2017 at 10:12pm |
|
That is why universal hydraulic oil is better than that old 80-90 stuff. Thinner oil will get in bearings better. MACK
|
|
Albert
Silver Level
Joined: 11 Sep 2009
Location: NW MO
Points: 410
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Jan 2017 at 10:31pm |
|
Question for Don !
Are you going to make a twin stick shift? It looks like you have another input shaft in the left diff. LOL
|
|
CrestonM
Orange Level
Joined: 08 Sep 2014
Location: Oklahoma
Points: 8410
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Jan 2017 at 11:07pm |
 MACK wrote:
That is why universal hydraulic oil is better than that old 80-90 stuff. Thinner oil will get in bearings better. MACK
|
|
|
Ed (Ont)
Orange Level
Joined: 08 Nov 2009
Location: New Lowell, Ont
Points: 1361
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Feb 2017 at 8:05am |
|
Manual calls for 50 lb torque for carrier capsrcrews. Is that what everyone is using? just wanting to confirm.
Edited by Ed (Ont) - 02 Feb 2017 at 3:53pm
|
|
SteveM C/IL
Orange Level Access
Joined: 12 Sep 2009
Location: Shelbyville IL
Points: 8367
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Feb 2017 at 6:19pm |
|
I would think 50 is enough...if that's what the book says why question it?You're making less than 50hp.
|
|
Ed (Ont)
Orange Level
Joined: 08 Nov 2009
Location: New Lowell, Ont
Points: 1361
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Feb 2017 at 9:58pm |
|
Yes I am less than 50 hp. Straight stock. LOL. Yes - thinking too much.
|
|
Don(MO)
Orange Level
Joined: 12 Sep 2009
Location: Bates City MO.
Points: 6862
|
Post Options
Thanks(1)
Quote Reply
Posted: 03 Feb 2017 at 8:50pm |
Albert wrote:
Question for Don !
Are you going to make a twin stick shift? It looks like you have another input shaft in the left diff. LOL |
Well it looked good on paper but not so-much after tiring to install it. lmao
Edited by Don(MO) - 03 Feb 2017 at 8:51pm
|
|
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
|
