Uphill/downhill battle continues!!

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Been doing some serious final grade work around the new house, had road extension to cut in for our lease farmers, a small patch worked to set a yard/garden shed and all the remnant earth work around the house/garage that finished construct this winter.  

Was moving the last few loads of cut away sod from a terrace grade when I lost a hose to the bucket tilt, man what a mess, now I have to get a little time, pull the blown unit and start replacement of all the lines on the shovel, all about the same age by appearance.  At least no fire as sprayed the engine pretty heavily.

All uphill battles seem to start on a downgrade!

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
DMiller Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 30719	Post Options Post Reply Quote DMiller Report Post Thanks(0) Quote Reply Topic: Uphill/downhill battle continues!! Posted: 22 May 2016 at 6:50pm
	Been doing some serious final grade work around the new house, had road extension to cut in for our lease farmers, a small patch worked to set a yard/garden shed and all the remnant earth work around the house/garage that finished construct this winter. Was moving the last few loads of cut away sod from a terrace grade when I lost a hose to the bucket tilt, man what a mess, now I have to get a little time, pull the blown unit and start replacement of all the lines on the shovel, all about the same age by appearance. At least no fire as sprayed the engine pretty heavily. All uphill battles seem to start on a downgrade!

Sponsored Links

Dozer Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 16 Aug 2011 Location: SW New York Points: 689	Post Options Post Reply Quote Dozer Report Post Thanks(0) Quote Reply Posted: 23 May 2016 at 6:14am
	Been there Done that. There is nothing like having a bath in hot hydraulic oil while working in a warm dirty, dusty environment. Best wishes on your house project. I keep trying to find time to pull the transmission on my HD7G

michale34 Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 15 Mar 2011 Location: arkansas Points: 472	Post Options Post Reply Quote michale34 Report Post Thanks(0) Quote Reply Posted: 23 May 2016 at 3:52pm
	I have been there and done that like dozer said 100 degree day and a hot oil bath . have seen the aftermath of a few that happened to in the woods and catch fire a yellow machine one day and a rusty piece of iron the next

DMiller Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 30719	Post Options Post Reply Quote DMiller Report Post Thanks(0) Quote Reply Posted: 05 Jun 2016 at 4:10pm
	Got off my butt and ordered hoses, will be replacing ALL shovel hoses as the indications are they are all on the verge of rupture, looked to a couple different options, spoke to a local shop but did not feel it warranted almost $1200 in materials(they stated would have to buy a full roll of seldom used hose and oddball fittings would be premium) so I went with Discount Hydraulic and ordered custom fit sizes, saved almost $500 over the local shop and got exactly what I have on the machine as to fitting types. Other option was to buy field attachable fittings and roll of hose to roll my own, again way out of price range. Swap them out then a full bath to clear the spilled oil and should be back to work.

Dozer Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 16 Aug 2011 Location: SW New York Points: 689	Post Options Post Reply Quote Dozer Report Post Thanks(0) Quote Reply Posted: 06 Jun 2016 at 6:48am
	I have not had good luck with reuseable hose fittings. I purchased a crimper and rolls of hose. Advantage I can replace a hose quickly. The disadvantage I have an expensive inventory. I use the more expensive "KT" hose that has a higher pressure rating and a tighter minimum bend radius than traditional SAE 100R2 AT

DMiller Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 30719	Post Options Post Reply Quote DMiller Report Post Thanks(0) Quote Reply Posted: 06 Jun 2016 at 2:14pm
	Hi Dozer, I did not wish to have the machinery laying about and growing dust, opted to buy replacement hoses as I can get them done and not worry too much about speed.

E7018 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 07 Dec 2009 Points: 167	Post Options Post Reply Quote E7018 Report Post Thanks(0) Quote Reply Posted: 07 Jun 2016 at 8:12pm
	I just got 12 hoses from Discount hydraulic hose for a manlift. About a day to take apart and a day back together. All the hoses in the boom got replaced. New hoses seem to be decent quality. All the fittings and length were right.

DMiller Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 30719	Post Options Post Reply Quote DMiller Report Post Thanks(0) Quote Reply Posted: 08 Jun 2016 at 6:50am
	This will be the third time I have used DH, not been disappointed yet. I was just thinking cheaper but in the long run to have them made by someone that has invested in the equipment and can keep inventory rolling plus have the volume of available fittings is a cheap alternative. I just find it ironic the shops local to me have to charge so much more, the closest in price was 30% higher here even with shipping from PA for DH. Dozer, KT series hose does work easier on tight installs, just too limited on pocketbook and availed suppliers for purchase.

Coke-in-MN Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41484	Post Options Post Reply Quote Coke-in-MN Report Post Thanks(0) Quote Reply Posted: 12 Jun 2016 at 6:13pm
	On my HD5G I had Aeroquip hoses with no skive 2 piece reusable fittings - I bought 100 ft of hose bulk and was replacing hoses - then switched over to stock shelf sizes from Fleet Farm - had to replace a couple fittings but was easier and cheaper to use the farm store 2 braid hose in the long run . On the FD5 dozer the long hoses 12' to 14' length seemed to go bad in same area so I had the hose made up into 2 pieces - now just costs to replace like 5' of hose rather than full length - cost me about $10 for the extra 2 fittings per hose . Backhoe was a replace all just after first one broke - kept good ones as spares for just in case
	Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful."

DMiller Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 30719	Post Options Post Reply Quote DMiller Report Post Thanks(0) Quote Reply Posted: 17 Jun 2016 at 5:54am
	Well managed to get all eight buried and two MP bucket supply lines changed until the heat from last two mornings got to me. Been 98 by noon both days, so worked until had enough. Today I fill the hydraulics, exercise the machine and top off oil then give it a good bath. uploads/916/IMG_1386a.jpg uploads/916/IMG_1387a.jpg uploads/916/IMG_1389a.jpg Old fittings stuck tight in lower cylinders so cut crimp collars and removed hoses then removed the fittings

michale34 Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 15 Mar 2011 Location: arkansas Points: 472	Post Options Post Reply Quote michale34 Report Post Thanks(0) Quote Reply Posted: 17 Jun 2016 at 2:00pm
	This heat is no joke when summer finaly got here it came in running. I have been working on my tractor radiator the last 2 days poked a hole while bush hogging

DMiller Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 30719	Post Options Post Reply Quote DMiller Report Post Thanks(0) Quote Reply Posted: 18 Jun 2016 at 8:51am
	Got the oil filled, managed to get the pressure washer un-buried in the shed but would not pump so no bath for Fat Alice and I live with it tacky as another project arises.