This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Plow Questions?? |
Post Reply |
Author | |
C.Wilcox
Bronze Level Joined: 16 Sep 2009 Points: 20 |
Post Options
Thanks(0)
Posted: 06 Jun 2010 at 9:09pm |
Can anybody explain to me what a "breaker" plow is and how it differs from any other plow? I've been searching for a mounted plow for my Allis C for some time now with no luck, but I see postings on craigslist for single bottom breaker plows fairly frequently and I'm wondering if I could use one of these behind my C or will it pull too hard? I also see a large number of postings for 2 bottom trip plows, but I'm thinking that these also may be too much for a C?
Thanks!
|
|
Sponsored Links | |
Bill Long
Orange Level Joined: 12 Sep 2009 Location: Bel Air, MD Points: 4556 |
Post Options
Thanks(0)
|
Butch Ohio is the resident plow expert on this forum but let's see if I can be of any assistance.
A Breaker is a spring loaded hitch on a pull plow that will "break away" in case the plow hits a hard obstruction.
I would not suggest a two bottom plow the C. A single bottom plow should be easily pulled providing the tractor has fluid in the tires or good weights. YOu could try without weights or fluid and it may work.
Good Luck!
Bill Long
|
|
jls
Silver Level Joined: 17 Sep 2009 Points: 138 |
Post Options
Thanks(0)
|
in central missouri where I grew up a breaking plow was what we called a moldboard plow as opposed to a disc plow or a slat moldboard plow or a chisel plow. didn't know about breaker plow.
|
|
Dusty MI
Orange Level Joined: 13 Sep 2009 Location: Charlotte, Mi Points: 5058 |
Post Options
Thanks(0)
|
I remember seeing single bottom moldboard plow that was maybe 24". My dad referred it as a breaking plow because they were used for plowing land that had not been plowed before or a long time.
Dusty
|
|
917 H, '48 G, '65 D-10 series III "Allis Express"
|
|
FredW
Orange Level Joined: 12 Sep 2009 Location: N. Weston,OH Points: 588 |
Post Options
Thanks(0)
|
I think you are all correct. I heard it all different ways. Fred
|
|
GregLawlerMinn
Orange Level Joined: 11 Sep 2009 Location: Lawler, Mn Points: 1226 |
Post Options
Thanks(0)
|
Dusty's recollection is the same as what we in Mn call a breaking plow. Usually a large (20-30") and heavy single bottom plow mounted on trip wheel frame. Generally comes with a very large coulter or a knife blade. They are used to plow land that is heavily sodded and/or has standing brush, such as willow. They dig in 10-15" deep, cut the roots off (well, most of the time) and rolls the brush into the furrow. I converted a 22" breaking plow with a 30" coulter from a trip plow (the trip mechanism was shot and the plow was free) to an Allis snap couple hitch, using the front of a parts plow. I pull it behind my D17D. Sure does a good job turning heavy sod and/or brush over.
|
|
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2. With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |