8010 power steering

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic


   Greetings all,Hauling silage wagons with the 8010 this weekend, and started to have trouble steering.  Tractor wanted to drift to the left, and was slow/unresponsive to turn back to the right.  Eventually, I lost all steering to the right.  
Reading information on the forum here, someone had a similar problem with an 8030, and the likely culprit was the orbital steering motor at the end of the steering wheel.  I am guessing, that after 9000 hours, a seal has blown, or some orifice is plugged, not allowing flow to the right turn valve.  
I see both used and new motors for sale online (Dealer, TractorParts ASAP, etc).  I also see that there is a seal kit part number shown on the partsbook.  
If this is a seal issue, I can replace the seals for less than $100.  If this is a bigger problem, the motor looks to be about $700 after the core charge is returned.  

What do you all recommend?  Rebuilt, replace, or am I barking up the wrong tree of symptoms?  

Thank you
John

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Johnwilson_osf Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 29 Jul 2012 Location: Mount Bethel PA Points: 931	Post Options Post Reply Quote Johnwilson_osf Report Post Thanks(0) Quote Reply Topic: 8010 power steering Posted: 06 Oct 2024 at 6:32pm
	Greetings all, Hauling silage wagons with the 8010 this weekend, and started to have trouble steering. Tractor wanted to drift to the left, and was slow/unresponsive to turn back to the right. Eventually, I lost all steering to the right. Reading information on the forum here, someone had a similar problem with an 8030, and the likely culprit was the orbital steering motor at the end of the steering wheel. I am guessing, that after 9000 hours, a seal has blown, or some orifice is plugged, not allowing flow to the right turn valve. I see both used and new motors for sale online (Dealer, TractorParts ASAP, etc). I also see that there is a seal kit part number shown on the partsbook. If this is a seal issue, I can replace the seals for less than $100. If this is a bigger problem, the motor looks to be about $700 after the core charge is returned. What do you all recommend? Rebuilt, replace, or am I barking up the wrong tree of symptoms? Thank you John
	Allis Express: Eastern PA on Rt 80 8050, 8010, 6080, 190, D14, DA 6035, AA 6690, 5650, Gleaner F2

Sponsored Links

DrAllis Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Points: 20523	Post Options Post Reply Quote DrAllis Report Post Thanks(0) Quote Reply Posted: 06 Oct 2024 at 6:38pm
	Re-seal the steering cylinder first. I suppose the leaf springs inside the steering control valve could be broken but I've never seen that yet. The other poster has never responded back. Edited by DrAllis - 06 Oct 2024 at 6:39pm

Johnwilson_osf Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 29 Jul 2012 Location: Mount Bethel PA Points: 931	Post Options Post Reply Quote Johnwilson_osf Report Post Thanks(0) Quote Reply Posted: 07 Oct 2024 at 7:39am
	Dr. Allis, Thank you for the reply. I did see in the other post that you mentioned removing the hoses at the cylinder, and capping them. Then try to turn the steering wheel. If I can't turn the wheel, then it is the steering cylinder that is bad. I am looking through my hydraulic fittings to see if I have some caps for the lines, and I will test that. Thank you John
	Allis Express: Eastern PA on Rt 80 8050, 8010, 6080, 190, D14, DA 6035, AA 6690, 5650, Gleaner F2

injpumpEd Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 13 Sep 2009 Location: Walnut IL Points: 4916	Post Options Post Reply Quote injpumpEd Report Post Thanks(0) Quote Reply Posted: 07 Oct 2024 at 9:49am
	Could a guy reverse the hoses on the cyl and see if the problem is still the same direction, thus pinpointing an internal cylinder leak vs a orbitrol issue? There's not really any seals inside the orbitrol , it's all sealed inside by metal precision fit.
	210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!