Putting 7050 transmission back togather

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I finally got time to put my power director standard transmission back together after the hollow shafts welded themselves together.  Anyway, I took the brake off the lower shaft and pulled it back to drop a gear and bearing out the front so I could get the hollow shafts out, now I am going back together and am having trouble getting the bearing and gear back on the bottom shaft and stabbed. Any tricks or do I need to strip the top shaft to have room to do it?  I had to take the lower one out to pull the hollow shafts  but do I have to cut the moon notches like in other threads to put the hollow shaft assembly in last? I am kind of confused. Thanks for all your help.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
KansRustbuzzard Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 08 May 2019 Location: Kansas Points: 25	Post Options Post Reply Quote KansRustbuzzard Report Post Thanks(0) Quote Reply Topic: Putting 7050 transmission back togather Posted: 23 Aug 2022 at 7:11pm
	I finally got time to put my power director standard transmission back together after the hollow shafts welded themselves together. Anyway, I took the brake off the lower shaft and pulled it back to drop a gear and bearing out the front so I could get the hollow shafts out, now I am going back together and am having trouble getting the bearing and gear back on the bottom shaft and stabbed. Any tricks or do I need to strip the top shaft to have room to do it? I had to take the lower one out to pull the hollow shafts but do I have to cut the moon notches like in other threads to put the hollow shaft assembly in last? I am kind of confused. Thanks for all your help.

Sponsored Links