Farm Equipment - Putting 7050 transmission back togather

Print Page | Close Window

Putting 7050 transmission back togather

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=190254
Printed Date: 25 Aug 2025 at 5:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Putting 7050 transmission back togather

Posted By: KansRustbuzzard
Subject: Putting 7050 transmission back togather
Date Posted: 23 Aug 2022 at 7:11pm

I finally got time to put my power director standard transmission back together after the hollow shafts welded themselves together. Anyway, I took the brake off the lower shaft and pulled it back to drop a gear and bearing out the front so I could get the hollow shafts out, now I am going back together and am having trouble getting the bearing and gear back on the bottom shaft and stabbed. Any tricks or do I need to strip the top shaft to have room to do it? I had to take the lower one out to pull the hollow shafts but do I have to cut the moon notches like in other threads to put the hollow shaft assembly in last? I am kind of confused. Thanks for all your help.