| Author |
 Topic Search  Topic Options
|
jbc1179 
Bronze Level
Joined: 10 May 2018
Location: Connecticut
Points: 34
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: D15 industrial shuttle clutch
Posted: 03 Jan 2022 at 1:35pm |
|
Need to rebuild the shuttle clutch on my D15 industrial (loader/backhoe).
Does anyone have a point of contact where to buy a service manual for it or is it the same as the AG D15 service manual.
Is the shuttle clutch similar to the power director?
Also, what is is good resource for shuttle clutch parts, disks etc..
And any advice on tackling this project?
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20548
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jan 2022 at 8:58pm |
|
The shuttle clutch itself is identical to the power director clutch. What is wrong with yours ?? If it is slipping, I'd imagine it just needs shims moved around, not rebuilt.
|
|
jbc1179
Bronze Level
Joined: 10 May 2018
Location: Connecticut
Points: 34
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jan 2022 at 9:11pm |
|
Well to tell you the true th I’m not all to sure. I don’t know much about the PD. This is the situation. With the PD lever I can slowly go forward or reverse in all gears. But I can only do that at a low idle, any faster and the tractor stops. I’m thinking the transmission clutch is perhaps the issue and will fix the problem? Or is it a shim issue in the PD?
|
|
jbc1179
Bronze Level
Joined: 10 May 2018
Location: Connecticut
Points: 34
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jan 2022 at 9:13pm |
|
The engine runs very well with no issues.
|
|
DiyDave
Orange Level Access
Joined: 11 Sep 2009
Location: Gambrills, MD
Points: 51730
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jan 2022 at 4:51am |
First thing to check is the set scrrew, at the bottom of the "big stick"... 
|
|
Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!
|
|
Alvin M
Orange Level
Joined: 24 Jun 2018
Location: PA
Points: 770
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jan 2022 at 5:54am |
|
Check foot clutch first dos it have free play
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20548
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jan 2022 at 6:27am |
|
If the long shuttle clutch lever stays "locked" into reverse or forward, that clutch can't hardly be slipping. The throw on that lever is about 30+ inches front to back. It has to have a good crisp snap to it when you pop it into neutral. If not, it may need shimming to restore proper snap.
|
|
