| Author |
 Topic Search  Topic Options
|
Trenthorn 
Bronze Level
Joined: 06 Apr 2016
Location: Ohio
Points: 72
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 7050 3 point
Posted: 27 Apr 2023 at 8:30pm |
|
My 7050 3 point does go all the way up. never really used it till we put our 10ft blade on it and it doesnt go all the way. The top arms are about 6inches or little more from the windows. Cable is new. Just wanted some insight on where to go from here.
|
|
1956 WD45, 1970 190xt Series 3, 712,716,917
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21835
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Apr 2023 at 8:32pm |
|
Better re-read what you wrote. The hitch DOES go all the way up?? or DOES NOT go all the way up? ? With nothing on the hitch, raise it all the way up. Walk to the back of the tractor and grab one draft arm and lift it up to see if the upper lift arms will go any higher. A weak back ?? Get someone strong or use a cherry picker. The lift arms should NOT go 100% to the top, because that is bottoming out the hydraulic cylinder inside, which is a bad thing AND if it is bottomed out, the hydraulic pump is pressurized all the time, which also isn't good. So, in the end, you want the lift arms to be a couple inches short of being 100% fully up. New control cable?? maybe needs to be shorter if hitch height is truly low. Need the blade to go higher ?? Put the top link in the lower hole on the tractor, NOT the top hole.
Edited by DrAllis - 27 Apr 2023 at 8:43pm
|
|
MACK
Orange Level
Joined: 17 Nov 2009
Points: 7664
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Apr 2023 at 9:12pm |
|
Shorten the 3/8 rod that pins to right lift arm if every thing is properly adjusted. MACK
|
|
Trenthorn
Bronze Level
Joined: 06 Apr 2016
Location: Ohio
Points: 72
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Apr 2023 at 9:16pm |
|
Dr allis sorry just seen that. The lift works fine but does not go all the way up I can pick the arms up another six inches at least before it hits the top. The inside of the draft arms are just touching the bottom of the top sway block. I tried to attach a picture but it's to big.
|
|
1956 WD45, 1970 190xt Series 3, 712,716,917
|
|
captaindana
Orange Level
Joined: 14 Sep 2009
Location: Fort Plain, NY
Points: 2559
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Apr 2023 at 4:48am |
|
Trenthorn…email your pic to yourself and send it smaller or medium size to yourself and it will fit just right.
|
|
Blue Skies and Tail Winds
Dana
|
|
